• Apfeltalk ändert einen Teil seiner Allgemeinen Geschäftsbedingungen (AGB), das Löschen von Useraccounts betreffend.
    Näheres könnt Ihr hier nachlesen: AGB-Änderung
  • Viele hassen ihn, manche schwören auf ihn, wir aber möchten unbedingt sehen, welche Bilder Ihr vor Eurem geistigen Auge bzw. vor der Linse Eures iPhone oder iPad sehen könnt, wenn Ihr dieses Wort hört oder lest. Macht mit und beteiligt Euch an unserem Frühjahrsputz ---> Klick

[MacBook Pro] MBP 13" Mid 2012 – Mehrere defekte Festplatten?

Mitglied 107065

Gast
Ich verzweifle hier langsam und hoffe, dass mir jemand einen guten Rat geben kann. Ich habe letzten Monat nach unverhofften Systemabstürzen, langen Ladezeiten und einem fehlerhaften S.M.A.R.T.-Status meiner original verbauten und mittlerweile über 3 Jahre alten HDD im MBP 13" Mid 2012 geschlussfolgert, dass die HDD langsam ihren Geist aufgibt und mir eine Hybridfestplatte bestellt. Die hab ich eingebaut, mein Backup aus Time Machine eingespielt und alles war super – bis Mittwoch. Da ist das System, nachdem ich den Mac aus dem Ruhezustand aufgeklappt hatte, einfach abgestürzt und der Mac startete mit dem Ordner mit blinkendem Fragezeichen neu.
Die Festplatte wurde im Recovery System nur noch sporadisch erkannt und wenn sie erkannt wurde, gab es immer fehlerhafte Sektoren und Fehler, die das Festplattendienstprogramm nicht reparieren konnte. Da dachte ich mir, die Festplatte wär auch kaputt und habe sie reklamiert und mir eine neue besorgt, wieder Hybridfestplatte, diesmal anderer Hersteller.
Als die neue Festplatte gestern ankam und ich sie eingebaut hatte, konnte ich sie ganz normal mit der Revovery-Partition formatieren, aber die Systemwiederherstellung aus Time Machine funktionierte nicht. Es kam die Meldung, dass die Wiederherstellung auf dem Zielsystem nicht durchgeführt werden könne. Dachte ich mir, vielleicht muss aus irgendeinem Grund OS X installiert werden und habe also erst einmal das Auslieferungssystem installieren wollen. Das wurde auch geladen, aber beim Neustart vor Beginn der Installation konnte der Mac die Festplatte wieder nicht erkennen (Ordnersymbol mit Fragezeichen). Und auch bei dieser Festplatte findet das Festplattendienstprogramm des Recoverysystems nun wieder Fehler, die es nicht beheben kann, auch wenn ich ganz neue Partitionen anlege.

Ich weiß nun grad nicht weiter. Kann es sein, dass ich einfach großes Pech hatte und zweimal defekte Festplatten gekauft habe oder kann hier irgendwo anders ein Fehler liegen, auf den ich nicht komme?

Ich habe in der Zeit, in der ich auf die zweite neue Festplatte gewartet habe, und auch jetzt in diesem Moment die originale Festplatte wieder drin, die erkannt wird. Deswegen kann ich mir nicht vorstellen, dass es an der restlichen Hardware des Macs liegt. Aber bevor ich nun wieder eine Festplatte reklamiere, wollte ich noch einmal in die Runde fragen, ob noch jemand Ideen hat, was genau hier schief läuft.
 

Hendrik Ruoff

Roter Herbstkalvill
Registriert
16.03.13
Beiträge
13.152
Hallo,

hast du genannte Festplatten auch mal extern zB via. USB getestet?
Die 13" Modellreihe ist dafür bekannt dass das SATA Flachbandkabel gerne mal den Geist aufgibt. Und nur Teilweise oder gar nicht mehr funktioniert.

Hendrik
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
Bitte poste die SMART-Werte Deiner Festplatte für mich zum Kaffeesatzlesen. SMARTReporter Tryout besorgen (http://www.corecode.at/smartreporter/, das Tryout kostet kein Geld), starten, dann auf Überprüfungen, S.M.A.R.T., dann auf Fortgeschrittene Werkzeuge, dann "Attribute zeigen" in der Zeile Deiner Systemfestplatte. Die dann Copy&Paste hier rein. Falls Du die smartmontools (Terminal) installiert hast, so geht es auch damit (einfacher: smartctl -a disk0).
 

Mitglied 107065

Gast
Hallo, danke euch für eure schnellen Rückmeldungen.

hast du genannte Festplatten auch mal extern zB via. USB getestet?
Dazu bin ich leider noch nicht gekommen, weil ich selbst keinen USB-SATA-Adapter habe. Ich werde das morgen mal versuchen.

Die 13" Modellreihe ist dafür bekannt dass das SATA Flachbandkabel gerne mal den Geist aufgibt. Und nur Teilweise oder gar nicht mehr funktioniert.
Davor hatte ich auch schon Angst, habe das für mich aber ausgeschlossen, weil nur die beiden neu gekauften Festplatten nicht funktionierten, die ursprünglich verbaute, die ich dazwischen immer mal wieder eingebaut habe und auch jetzt drin habe, aber immer erkannt wird und läuft.

Ich hatte schon Sorge, dass mein Mac mit Hybridfestplatten nicht klar kommt, aber dazu habe ich nirgendwo etwas gefunden.

Bitte poste die SMART-Werte Deiner Festplatte für mich zum Kaffeesatzlesen.
Ich kann dir nur die SMART-Werte der ursprünglichen Platte geben, die ich ohnehin los werden will, weil sie nicht mehr in Ordnung ist, nicht die der neuen Platte, die das hauptsächliche Problem ist, weil ich mit der ja nicht einmal so weit komme, dass ich OS X installieren könnte. Das bringt dann doch nicht viel, oder?
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
Ich kann dir nur die SMART-Werte der ursprünglichen Platte geben, die ich ohnehin los werden will, weil sie nicht mehr in Ordnung ist, nicht die der neuen Platte, die das hauptsächliche Problem ist, weil ich mit der ja nicht einmal so weit komme, dass ich OS X installieren könnte. Das bringt dann doch nicht viel, oder?
das könnte reichen, um den Verdacht "kaputtes SATA-Kabel" zu konkretisieren, also mach mal :D
Außerdem könntest Du mit einer externen Platte booten, um auch von der anderen "neuen" die SMART-Werte wie beschrieben zu erhalten. Man muss halt nur mal einen SMARTReporter starten können
 

Mitglied 107065

Gast
Außerdem könntest Du mit einer externen Platte booten
Auf die einfachsten Sachen kommt man ja manchmal nicht…
Ich habe einen Freund gefunden, von dem ich mir nachher einen Adapter leihen kann. Dann werde ich das einmal ausprobieren. Bis dahin hier der SMART-Report der alten Platte:
Code:
/Users/haukeheyen/Downloads/SMARTReporter-DEMO.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk0

smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     APPLE HDD TOSHIBA MK5065GSXF
Serial Number:    82TLCNVAT
LU WWN Device Id: 5 000039 433d083d1
Firmware Version: GV201B
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Mar 20 11:49:28 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  120) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 163) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       2104
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       11728
  5 Reallocated_Sector_Ct   0x0033   001   001   050    Pre-fail  Always   FAILING_NOW 2047
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   069   069   000    Old_age   Always       -       12665
10 Spin_Retry_Count        0x0033   253   100   030    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       10861
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       208
192 Power-Off_Retract_Count 0x0032   099   099   000    Old_age   Always       -       838
193 Load_Cycle_Count        0x0032   009   009   000    Old_age   Always       -       917543
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       29 (Min/Max 11/47)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       201
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8213
222 Loaded_Hours            0x0032   075   075   000    Old_age   Always       -       10209
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       329
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       609

SMART Error Log Version: 1
ATA Error Count: 73 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 73 occurred at disk power-on lifetime: 12620 hours (525 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 01 6a f1 d9 3e 60  Error: ABRT at LBA = 0x003ed9f1 = 4119025

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 10 68 38 4c 0f 40 00      00:11:07.247  READ FPDMA QUEUED
  61 10 60 78 1d 3f 40 00      00:11:07.247  WRITE FPDMA QUEUED
  60 10 58 78 1d 3f 40 00      00:11:07.247  READ FPDMA QUEUED
  60 10 50 a7 64 0f 40 00      00:11:07.246  READ FPDMA QUEUED
  61 10 48 68 1d 3f 40 00      00:11:07.242  WRITE FPDMA QUEUED

Error 72 occurred at disk power-on lifetime: 12620 hours (525 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  30 00 01 01 00 00 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  aa aa aa aa aa aa aa ff      00:10:31.940  [RESERVED]
  25 00 08 70 d4 37 e0 00      00:10:30.847  READ DMA EXT
  25 00 88 e8 cc 37 e0 00      00:10:30.822  READ DMA EXT
  25 00 08 e0 cc 37 e0 00      00:10:30.822  READ DMA EXT
  25 00 f8 e8 c4 37 e0 00      00:10:30.795  READ DMA EXT

Error 71 occurred at disk power-on lifetime: 12620 hours (525 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  30 00 01 01 00 00 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  aa aa aa aa aa aa aa ff      00:10:15.038  [RESERVED]
  aa aa aa aa aa aa aa ff      00:10:13.483  [RESERVED]
  25 00 08 a8 26 28 e0 00      00:10:11.552  READ DMA EXT
  25 00 20 88 1e 28 e0 00      00:10:11.522  READ DMA EXT
  25 00 08 10 41 28 e0 00      00:10:11.461  READ DMA EXT

Error 70 occurred at disk power-on lifetime: 12620 hours (525 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  30 00 01 01 00 00 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  aa aa aa aa aa aa aa ff      00:10:13.483  [RESERVED]
  25 00 08 a8 26 28 e0 00      00:10:11.552  READ DMA EXT
  25 00 20 88 1e 28 e0 00      00:10:11.522  READ DMA EXT
  25 00 08 10 41 28 e0 00      00:10:11.461  READ DMA EXT
  25 00 70 a0 2a 28 e0 00      00:10:11.384  READ DMA EXT

Error 69 occurred at disk power-on lifetime: 12620 hours (525 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  30 00 01 01 00 00 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  aa aa aa aa aa aa aa ff      00:09:51.942  [RESERVED]
  aa aa aa aa aa aa aa ff      00:09:51.025  [RESERVED]
  2f 00 01 10 00 00 00 00      00:09:47.523  READ LOG EXT
  60 10 d0 48 2a 2e 40 00      00:09:47.523  READ FPDMA QUEUED
  25 00 08 30 78 72 40 00      00:09:46.846  READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
Dass diese Festplatte kaputt ist kann ich glaube ich unterschreiben.
Wegen kaputtem Kabel sehe ich jetzt keinen Hinweis, das muss aber nichts heißen.

Wenn Du nachher noch für die andere liefern kannst, mach mal! Außerdem bitte unter "Über diesen Mac"/Systembericht/SATA/intel 7 Series Chipset "ausgehandelte Link-Geschwindigkeit" gucken und posten.
 

Mitglied 107065

Gast
unter "Über diesen Mac"/Systembericht/SATA/intel 7 Series Chipset "ausgehandelte Link-Geschwindigkeit"
Aktuell:
Ausgehandelte Link-Geschwindigkeit: 3 Gigabit

Ich werde nachher alle Daten zu der anderen Platte liefern. Vielen Dank schon mal für die Unterstützung!
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
da sollte definitiv 6G beim 2012er Modell stehen; das scheint mir ein deutlicher Hinweis aufs Kabel zu sein!
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
Link-Geschwindigkeit=das, was der Anschluss kann
ausgehandelt=naja, wie der Name schon sagt... :D

Die ausgehandelte Geschwindigkeit kann maximal so groß sein wie der Link hergibt; wenn die Geschwindigkeit nicht so hoch ist, dann ist entweder das Gerät nicht zu mehr in der Lage (also ein SATA-I oder SATA-II-Gerät) oder es kommt zu Fehlern in der Kommunikation, worauf sich beide Partner "herunterhandeln".
 

Raschie

Allington Pepping
Registriert
27.12.15
Beiträge
188
Genau das wollte ich damit sagen.
Meine noch verbaute HDD kann auch nur:

Link-Geschwindigkeit: 6 Gigabit
Ausgehandelte Link-Geschwindigkeit: 3 Gigabit

Und definitiv ist das Festplatten-Kabel heile!

Mal schauen, wenn ich die SSD eingebaut habe .
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
...der Punkt beim TE ist: Die ausgehandelte Linkgeschwindigkeit betrifft die original verbaute Festplatte.
Und die wurde mit 6G ausgeliefert!
 

Mitglied 107065

Gast
Ich bin noch nicht dazu gekommen, die Platten wieder zu untersuchen, da ich grad noch an etwas arbeiten muss.

Die Link-Geschwindigkeit ist in der Tat 6 Gbit, ausgehandelt 3. Alle weiteren Details werde ich versuchen, heute noch in Erfahrung zu bringen, allein, weil ich über die viele Hilfe sehr dankbar bin.
 

Mitglied 107065

Gast
So, @Wuchtbrumme, ich bin mir nicht sicher, ob die Platte tatsächlich mit 6 Gigabit ausgeliefert wurde, denn wenn die neue angeschlossen ist, wird mir angezeigt:
Code:
Link-Geschwindigkeit:    6 Gigabit
Ausgehandelte Link-Geschwindigkeit: 6 Gigabit

EDIT: Ich sehe grad selbst, dass in dem SMART-Report von vorhin auch stand, dass die Platte eine Verbindung von 3 Gb/s hat.

Und ich habe verschiedene Szenarien getestet. Die neue Festplatte extern per SATA-USB-Adapter verbunden. Da konnte sie nicht initialisiert werden und ich habe sie neu formatiert. Dann habe ich die Platten getauscht, also alte an den Adapter und neue in den Mac, um die SMART-Werte lesen zu können. Als OS X gestartet war, wurde die neue Festplatte, jetzt intern, wieder nicht erkannt und musste neu formatiert werden. Ich habe nun eine Partition drauf und das SMART-Ergebnis:
Code:
/Users/haukeheyen/Downloads/SMARTReporter-DEMO.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk0

smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA HDWM110
Serial Number:    X582C0JRT
LU WWN Device Id: 5 000039 69338265d
Firmware Version: HEF01A
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Mar 20 22:37:50 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (  35)    The self-test routine was interrupted
                    by the host with a hard or soft reset.
Total time to complete Offline
data collection:         (  120) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 213) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       2716
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       15
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       10
10 Spin_Retry_Count        0x0033   100   100   030    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       15
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       4
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       72
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       27 (Min/Max 19/41)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   253   000    Old_age   Always       -       47962
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
222 Loaded_Hours            0x0032   100   100   000    Old_age   Always       -       9
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       272
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 48197 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 48197 occurred at disk power-on lifetime: 10 hours (0 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 38 37 40 da 40  Error: ICRC, ABRT at LBA = 0x00da4037 = 14303287

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 38 30 40 da 40 00      00:18:24.354  READ FPDMA QUEUED
  61 08 30 48 40 da 40 00      00:18:24.354  WRITE FPDMA QUEUED
  61 10 28 98 01 62 40 00      00:18:24.353  WRITE FPDMA QUEUED
  61 10 20 48 01 62 40 00      00:18:24.353  WRITE FPDMA QUEUED
  61 08 18 d8 41 06 40 00      00:18:24.352  WRITE FPDMA QUEUED

Error 48196 occurred at disk power-on lifetime: 10 hours (0 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 b0 50 44 ca 40   176 sectors at LBA = 0x00ca4450 = 13255760

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 c0 40 44 ca 40 00      00:18:22.773  READ DMA EXT
  ef 10 03 00 00 00 00 00      00:18:22.773  SET FEATURES [Enable SATA feature]
  ef 10 02 00 00 00 00 00      00:18:22.773  SET FEATURES [Enable SATA feature]
  ef 02 00 00 00 00 00 00      00:18:22.772  SET FEATURES [Enable write cache]
  ef aa 00 00 00 00 00 00      00:18:22.772  SET FEATURES [Enable read look-ahead]

Error 48195 occurred at disk power-on lifetime: 10 hours (0 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 a0 60 44 ca 40   160 sectors at LBA = 0x00ca4460 = 13255776

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 c0 40 44 ca 40 00      00:18:22.529  READ DMA EXT
  ef 10 03 00 00 00 00 00      00:18:22.529  SET FEATURES [Enable SATA feature]
  ef 10 02 00 00 00 00 00      00:18:22.528  SET FEATURES [Enable SATA feature]
  ef 02 00 00 00 00 00 00      00:18:22.528  SET FEATURES [Enable write cache]
  ef aa 00 00 00 00 00 00      00:18:22.527  SET FEATURES [Enable read look-ahead]

Error 48194 occurred at disk power-on lifetime: 10 hours (0 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 40 c0 44 ca 40   64 sectors at LBA = 0x00ca44c0 = 13255872

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 c0 40 44 ca 40 00      00:18:22.284  READ DMA EXT
  25 00 20 e8 45 ca 40 00      00:18:22.284  READ DMA EXT
  ef 10 03 00 00 00 00 00      00:18:22.284  SET FEATURES [Enable SATA feature]
  ef 10 02 00 00 00 00 00      00:18:22.283  SET FEATURES [Enable SATA feature]
  ef 02 00 00 00 00 00 00      00:18:22.283  SET FEATURES [Enable write cache]

Error 48193 occurred at disk power-on lifetime: 10 hours (0 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 50 b0 44 ca 40   80 sectors at LBA = 0x00ca44b0 = 13255856

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 c0 40 44 ca 40 00      00:18:22.040  READ DMA EXT
  ef 10 03 00 00 00 00 00      00:18:22.040  SET FEATURES [Enable SATA feature]
  ef 10 02 00 00 00 00 00      00:18:22.039  SET FEATURES [Enable SATA feature]
  ef 02 00 00 00 00 00 00      00:18:22.039  SET FEATURES [Enable write cache]
  ef aa 00 00 00 00 00 00      00:18:22.039  SET FEATURES [Enable read look-ahead]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Interrupted (host reset)      30%        10         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Und werde mal schauen, wie es nach einem neuen Bootvorgang aussieht.
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 47962
da steht eigentlich schon, dass es Fehler auf dem Interface gibt. Fehlerquelle Nr. 1 diesbezüglich ist das Kabel. Also: Kabel tauschen (lassen)! Ich selbst habe das noch nie gemacht, doch es finden sich hier einige, die sagen, das sie das Ersatzteil anhand der Teilenummer (steht wohl drauf) in der Bucht geschossen und dann selbst getauscht haben.

Ansonsten sieht die Platte absolut in Ordnung aus.
 

Mitglied 107065

Gast
Hat jemand eine Idee, wieso die alte Platte keine Probleme an dem Kabel hat, die neue aber umso größere? Das macht mich die ganze Zeit so stutzig.
 

Wuchtbrumme

Golden Noble
Registriert
03.05.10
Beiträge
21.496
Habe ich doch geschrieben: Alte Platte ist toleranter gegenüber Protokollfehlern auf dem Datenkabel, während es die neuere nicht ist.

Die Lösung ist doch klar - Kabel austauschen.
 

Mitglied 107065

Gast
Ah, das hatte ich aus den Augen verloren. Dass es am Kabel liegt, glaub ich dir auch. Wollte es nur besser nachvollziehen können. Gut, dann wird nun nach Kabeln gesucht.
Vielen Dank noch einmal.