[10.9 Mavericks] MBP 15" Mid 2010: Grafikprobleme seit Mavericks

off-road-biker · 21.12.13

Hallo Zusammen,

vielleicht hat jemand ne Lösung für dieses nervige Grafik-Problem auf meinem MacBook Pro 15" Mitte 2010.

Seit der Installation von Mavericks habe ich immer wieder und immer schlimmer Grafikprobleme (siehe Anhänge).
Hinzu kommt, das der Mac ab und zu hängt und der Beachball zu sehen ist. Jedoch hatte ich bisher keiner Kernel Panics.

Im Apple Store war aber trotz über 2h Test kein Grafikproblem feststellbar, was sehr ärgerlich ist! :-c

Noch knapp 30 Tage Applecare und mit den Grafikproblemen können die nicht weiter helfen, obwohl ich extra Sceenshots gemacht habe.

Vorab herausgefunden habe ich, dass dies immer passiert, wenn die integrierte Grafikkarte verwendet wird (scheint die Intel HD Graphics von den beiden zu sein). Bei der diskreten Grafikkarte (NVIDIA GeForce GT 330M) passiert das nie!

Etre-Check

Code:

[B]Hardware Information:
[/B][SIZE=2]   MacBook Pro (15-inch, Mid 2010)[/SIZE]
[SIZE=2]    MacBook Pro - model: MacBookPro6,2[/SIZE]
[SIZE=2]    1 2.4 GHz Intel Core i5 CPU: 2 cores[/SIZE]
[SIZE=2]    4 GB RAM[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Video Information:[/B][/SIZE]
[SIZE=2]    Intel HD Graphics - VRAM: 288 MB[/SIZE]
[SIZE=2]    NVIDIA GeForce GT 330M - VRAM: 256 MB[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Audio Plug-ins:[/B][/SIZE]
[SIZE=2]    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9[/SIZE]
[SIZE=2]    AirPlay: Version: 1.9 - SDK 10.9[/SIZE]
[SIZE=2]    AppleAVBAudio: Version: 2.0.0 - SDK 10.9[/SIZE]
[SIZE=2]    iSightAudio: Version: 7.7.3 - SDK 10.9[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]System Software:[/B][/SIZE]
[SIZE=2]    OS X 10.9.1 (13B42) - Uptime: 0 days 7:30:58[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Disk Information:[/B][/SIZE]
[SIZE=2]    M4-CT256M4SSD2 disk0 : (256,06 GB)[/SIZE]
[SIZE=2]        EFI (disk0s1) <not mounted>: 209,7 MB [/SIZE]
[SIZE=2]        disk0s2 (disk0s2) <not mounted>: 255,2 GB [/SIZE]
[SIZE=2]        Recovery HD (disk0s3) <not mounted>: 650 MB [/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]    ST9500420ASG disk1 : (500,11 GB)[/SIZE]
[SIZE=2]        SYSLINUX (disk1s1) <not mounted>: 8,2 MB [/SIZE]
[SIZE=2]        rEFIt (disk1s2) <not mounted>: 1,07 GB [/SIZE]
[SIZE=2]        offroadbiker HDD (disk1s3) /Volumes/offroadbiker HDD: 497,96 GB (184,5 GB free)[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]USB Information:[/B][/SIZE]
[SIZE=2]    Apple Inc. Apple Internal Keyboard / Trackpad [/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]    Apple Inc. BRCM2070 Hub [/SIZE]
[SIZE=2]        Apple Inc. Bluetooth USB Host Controller [/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]    Apple Internal Memory Card Reader 8,02 GB[/SIZE]
[SIZE=2]        EFI (disk3s1) <not mounted>: 209,7 MB [/SIZE]
[SIZE=2]        OS X 10.9 Install Disk - 10.9 (disk3s2) /Volumes/OS X 10.9 Install Disk - 10.9: 7,67 GB (2,25 GB free)[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]    Apple Computer, Inc. IR Receiver [/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]    Apple Inc. Built-in iSight [/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]FireWire Information:[/B][/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Thunderbolt Information:[/B][/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Kernel Extensions:[/B][/SIZE]
[SIZE=2]    com.squirrels.driver.AirParrotSpeakers    (1.8 - SDK 10.8)[/SIZE]
[SIZE=2]    com.globaldelight.driver.BoomDevice    (1.1 - SDK 10.9)[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Problem System Launch Daemons:[/B][/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Problem System Launch Agents:[/B][/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Launch Daemons:[/B][/SIZE]
[SIZE=2]    [loaded]    com.adobe.fpsaud.plist[/SIZE]
[SIZE=2]    [loaded]    com.anchorfree.ajaxserver.plist[/SIZE]
[SIZE=2]    [loaded]    com.bresink.system.securityagent3a.plist[/SIZE]
[SIZE=2]    [loaded]    com.oracle.java.Helper-Tool.plist[/SIZE]
[SIZE=2]    [loaded]    de.novamedia.launch2net.Premium.nmnetmgrd.plist[/SIZE]
[SIZE=2]    [loaded]    org.cindori.AuthHelper.plist[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Launch Agents:[/B][/SIZE]
[SIZE=2]    [loaded]    com.oracle.java.Java-Updater.plist[/SIZE]
[SIZE=2]    [loaded]    de.novamedia.launch2net.Premium.deviceobserver.plist[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]User Launch Agents:[/B][/SIZE]
[SIZE=2]    [loaded]    com.amazon.cloud-player.plist[/SIZE]
[SIZE=2]    [loaded]    ws.agile.1PasswordAgent.plist[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]User Login Items:[/B][/SIZE]
[SIZE=2]    Boom[/SIZE]
[SIZE=2]    Flux[/SIZE]
[SIZE=2]    Bartender[/SIZE]
[SIZE=2]    iTunesHelper[/SIZE]
[SIZE=2]    Caffeine[/SIZE]
[SIZE=2]    TextExpander[/SIZE]
[SIZE=2]    Dropbox[/SIZE]
[SIZE=2]    Canon IJ Network Scanner Selector2[/SIZE]
[SIZE=2]    Music Manager[/SIZE]
[SIZE=2]    SmartSleep Helper[/SIZE]
[SIZE=2]    SMARTReporter Tryout[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]3rd Party Preference Panes:[/B][/SIZE]
[SIZE=2]    Flash Player[/SIZE]
[SIZE=2]    Flip4Mac WMV[/SIZE]
[SIZE=2]    GoPro[/SIZE]
[SIZE=2]    Java[/SIZE]
[SIZE=2]    MusicManager[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Internet Plug-ins::[/B][/SIZE]
[SIZE=2]    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8[/SIZE]
[SIZE=2]    FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6[/SIZE]
[SIZE=2]    EPPEX Plugin: Version: 4.1.0.0[/SIZE]
[SIZE=2]    Flash Player: Version: 11.9.900.170 - SDK 10.6[/SIZE]
[SIZE=2]    Default Browser: Version: 537 - SDK 10.9[/SIZE]
[SIZE=2]    iPhotoPhotocast: Version: 7.0 - SDK 10.8[/SIZE]
[SIZE=2]    QuickTime Plugin: Version: 7.7.3[/SIZE]
[SIZE=2]    GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7[/SIZE]
[SIZE=2]    Silverlight: Version: 5.1.20913.0 - SDK 10.6[/SIZE]
[SIZE=2]    VLC Plugin: Version: 1.0.5[/SIZE]
[SIZE=2]    JavaAppletPlugin: Version: Java 7 Update 45[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Bad Fonts:[/B][/SIZE]
[SIZE=2]    None[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Old applications:[/B][/SIZE]
[SIZE=2]    Easy-PhotoPrint EX:    Version: Version 4.5.0 - SDK 10.4[/SIZE]
[SIZE=2]        /Applications/Canon Utilities/Easy-PhotoPrint EX/Easy-PhotoPrint EX.app[/SIZE]
[SIZE=2]    Garmin Map Update:    Version: 4.5.1 - SDK 10.5[/SIZE]
[SIZE=2]        /Users/Kay/Library/Application Support/Garmin/Garmin Map Update/tmp/Garmin Map Update.app[/SIZE]
[SIZE=2]    Garmin Map Update:    Version: 4.5.1 - SDK 10.5[/SIZE]
[SIZE=2]        /Applications/Garmin Map Update.app[/SIZE]
[SIZE=2]    Garmin MapManager:    Version: 3.0.1 - SDK 10.5[/SIZE]
[SIZE=2]        /Applications/Garmin MapManager.app[/SIZE]
[SIZE=2]    Garmin POILoader:    Version: 2.2.2 - SDK 10.5[/SIZE]
[SIZE=2]        /Applications/Garmin POILoader.app[/SIZE]
[SIZE=2]    Garmin WebUpdater:    Version: 2.1.3 - SDK 10.4[/SIZE]
[SIZE=2]        /Applications/Garmin WebUpdater.app[/SIZE]
[SIZE=2]    Music Manager:    Version: 1.0 - SDK 10.5[/SIZE]
[SIZE=2]        /Applications/MusicManager.app[/SIZE]
[SIZE=2]    SLLauncher:    Version: 1.0 - SDK 10.5[/SIZE]
[SIZE=2]        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app[/SIZE]
[SIZE=2]    Sofa Control:    Version: 2.9.6 - SDK 10.0[/SIZE]
[SIZE=2]        /Applications/Sofa Control.app[/SIZE]
[SIZE=2]    SuperDuper!:    Version: 2.7.1 - SDK 10.4[/SIZE]
[SIZE=2]        /Applications/SuperDuper!.app[/SIZE]
[SIZE=2]    iSkysoft Helper Compact:    Version: 2.2.6.4 - SDK 10.5[/SIZE]
[SIZE=2]        /Users/Kay/Library/Application Support/Helper/iSkysoft Helper Compact.app[/SIZE]
[SIZE=2]    launch2net Premium deinstallieren:    Version: 1.0 - SDK 10.5[/SIZE]
[SIZE=2]        /Applications/launch2net Premium/Deinstaller.app[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Time Machine:[/B][/SIZE]
[SIZE=2]    Skip System Files: NO[/SIZE]
[SIZE=2]    Mobile backups: OFF[/SIZE]
[SIZE=2]    Auto backup: YES[/SIZE]
[SIZE=2]    Volumes being backed up:[/SIZE]
[SIZE=2]    Destinations:[/SIZE]
[SIZE=2]        TimeMachine Backup [Local] (Last used)[/SIZE]
[SIZE=2]        Total size: 930.88 GB [/SIZE]
[SIZE=2]        Total number of backups: 20 [/SIZE]
[SIZE=2]        Oldest backup: 2013-12-19 01:03:11 +0000 [/SIZE]
[SIZE=2]        Last backup: 2013-12-20 00:22:37 +0000 [/SIZE]
[SIZE=2]        Size of backup disk: Excellent[/SIZE]
[SIZE=2]            Backup size 930.88 GB > (Disk size 0 B X 3)[/SIZE]
[SIZE=2][B][I]    Time Machine details may not be accurate.[/I][/B][/SIZE]
[SIZE=2][B][I]    All volumes being backed up may not be listed.[/I][/B][/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Top Processes by CPU:[/B][/SIZE]
[SIZE=2]        13%    Finder[/SIZE]
[SIZE=2]         8%    WindowServer[/SIZE]
[SIZE=2]         4%    com.apple.IconServicesAgent[/SIZE]
[SIZE=2]         4%    iTube Studio[/SIZE]
[SIZE=2]         4%    Locum[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Top Processes by Memory:[/B][/SIZE]
[SIZE=2]    258 MB    Safari[/SIZE]
[SIZE=2]    139 MB    mds_stores[/SIZE]
[SIZE=2]    74 MB    com.apple.WebKit.WebContent[/SIZE]
[SIZE=2]    62 MB    WindowServer[/SIZE]
[SIZE=2]    48 MB    Finder[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2][B]Virtual Memory Statistics:[/B][/SIZE]
[SIZE=2]    589 MB    Free RAM[/SIZE]
[SIZE=2]    1.12 GB    Active RAM[/SIZE]
[SIZE=2]    466 MB    Inactive RAM[/SIZE]
[SIZE=2]    898 MB    Wired RAM[/SIZE]
[SIZE=2]    1.76 GB    Page-ins[/SIZE]
[SIZE=2]    20 MB    Page-outs[/SIZE]

Smart-Reporter
Crucial m4 256GB SSD – hier ist das Betriebssystem drauf:

Code:

smartctl 6.1 2013-03-16 r3800 [x86_64-apple-darwin12.3.0] (local build)
[SIZE=2]Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]=== START OF INFORMATION SECTION ===[/SIZE]
[SIZE=2]Model Family:     Crucial/Micron RealSSD m4/C400[/SIZE]
[SIZE=2]Device Model:     M4-CT256M4SSD2[/SIZE]
[SIZE=2]Serial Number:    00000000111603062CAB[/SIZE]
[SIZE=2]LU WWN Device Id: 5 00a075 103062cab[/SIZE]
[SIZE=2]Firmware Version: 070H[/SIZE]
[SIZE=2]User Capacity:    256,060,514,304 bytes [256 GB][/SIZE]
[SIZE=2]Sector Size:      512 bytes logical/physical[/SIZE]
[SIZE=2]Rotation Rate:    Solid State Device[/SIZE]
[SIZE=2]Device is:        In smartctl database [for details use: -P show][/SIZE]
[SIZE=2]ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6[/SIZE]
[SIZE=2]SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)[/SIZE]
[SIZE=2]Local Time is:    Sat Dec 21 19:29:48 2013 CET[/SIZE]
[SIZE=2]SMART support is: Available - device has SMART capability.[/SIZE]
[SIZE=2]SMART support is: Enabled[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]=== START OF ENABLE/DISABLE COMMANDS SECTION ===[/SIZE]
[SIZE=2]SMART Enabled.[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]=== START OF READ SMART DATA SECTION ===[/SIZE]
[SIZE=2]SMART overall-health self-assessment test result: PASSED[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]General SMART Values:[/SIZE]
[SIZE=2]Offline data collection status:  (0x80)    Offline data collection activity[/SIZE]
[SIZE=2]                    was never started.[/SIZE]
[SIZE=2]                    Auto Offline Data Collection: Enabled.[/SIZE]
[SIZE=2]Self-test execution status:      (   0)    The previous self-test routine completed[/SIZE]
[SIZE=2]                    without error or no self-test has ever [/SIZE]
[SIZE=2]                    been run.[/SIZE]
[SIZE=2]Total time to complete Offline [/SIZE]
[SIZE=2]data collection:         ( 1190) seconds.[/SIZE]
[SIZE=2]Offline data collection[/SIZE]
[SIZE=2]capabilities:              (0x7b) SMART execute Offline immediate.[/SIZE]
[SIZE=2]                    Auto Offline data collection on/off support.[/SIZE]
[SIZE=2]                    Suspend Offline collection upon new[/SIZE]
[SIZE=2]                    command.[/SIZE]
[SIZE=2]                    Offline surface scan supported.[/SIZE]
[SIZE=2]                    Self-test supported.[/SIZE]
[SIZE=2]                    Conveyance Self-test supported.[/SIZE]
[SIZE=2]                    Selective Self-test supported.[/SIZE]
[SIZE=2]SMART capabilities:            (0x0003)    Saves SMART data before entering[/SIZE]
[SIZE=2]                    power-saving mode.[/SIZE]
[SIZE=2]                    Supports SMART auto save timer.[/SIZE]
[SIZE=2]Error logging capability:        (0x01)    Error logging supported.[/SIZE]
[SIZE=2]                    General Purpose Logging supported.[/SIZE]
[SIZE=2]Short self-test routine [/SIZE]
[SIZE=2]recommended polling time:      (   2) minutes.[/SIZE]
[SIZE=2]Extended self-test routine[/SIZE]
[SIZE=2]recommended polling time:      (  19) minutes.[/SIZE]
[SIZE=2]Conveyance self-test routine[/SIZE]
[SIZE=2]recommended polling time:      (   3) minutes.[/SIZE]
[SIZE=2]SCT capabilities:            (0x003d)    SCT Status supported.[/SIZE]
[SIZE=2]                    SCT Error Recovery Control supported.[/SIZE]
[SIZE=2]                    SCT Feature Control supported.[/SIZE]
[SIZE=2]                    SCT Data Table supported.[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Attributes Data Structure revision number: 16[/SIZE]
[SIZE=2]Vendor Specific SMART Attributes with Thresholds:[/SIZE]
[SIZE=2]ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE[/SIZE]
[SIZE=2]  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0[/SIZE]
[SIZE=2]  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0[/SIZE]
[SIZE=2]  9 Power_On_Hours          0x0032   100   100   001    Old_age   Always       -       1478[/SIZE]
[SIZE=2] 12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       2839[/SIZE]
[SIZE=2]170 Grown_Failing_Block_Ct  0x0033   100   100   010    Pre-fail  Always       -       0[/SIZE]
[SIZE=2]171 Program_Fail_Count      0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]172 Erase_Fail_Count        0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]173 Wear_Leveling_Count     0x0033   098   098   010    Pre-fail  Always       -       73[/SIZE]
[SIZE=2]174 Unexpect_Power_Loss_Ct  0x0032   100   100   001    Old_age   Always       -       31[/SIZE]
[SIZE=2]181 Non4k_Aligned_Access    0x0022   100   100   001    Old_age   Always       -       837 411 426[/SIZE]
[SIZE=2]183 SATA_Iface_Downshift    0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always       -       0[/SIZE]
[SIZE=2]187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]188 Command_Timeout         0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]189 Factory_Bad_Block_Ct    0x000e   100   100   001    Old_age   Always       -       91[/SIZE]
[SIZE=2]194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       0[/SIZE]
[SIZE=2]195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always       -       360[/SIZE]
[SIZE=2]196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline      -       0[/SIZE]
[SIZE=2]199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]202 Perc_Rated_Life_Used    0x0018   098   098   001    Old_age   Offline      -       2[/SIZE]
[SIZE=2]206 Write_Error_Rate        0x000e   100   100   001    Old_age   Always       -       0[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Error Log Version: 1[/SIZE]
[SIZE=2]No Errors Logged[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Self-test log structure revision number 1[/SIZE]
[SIZE=2]Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error[/SIZE]
[SIZE=2]# 1  Short offline       Completed without error       00%      1477         -[/SIZE]
[SIZE=2]# 2  Short offline       Completed without error       00%      1477         -[/SIZE]
[SIZE=2]# 3  Extended offline    Completed without error       00%      1477         -[/SIZE]
[SIZE=2]# 4  Short offline       Completed without error       00%      1477         -[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Selective self-test log data structure revision number 1[/SIZE]
[SIZE=2] SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS[/SIZE]
[SIZE=2]    1        0        0  Not_testing[/SIZE]
[SIZE=2]    2        0        0  Not_testing[/SIZE]
[SIZE=2]    3        0        0  Not_testing[/SIZE]
[SIZE=2]    4        0        0  Not_testing[/SIZE]
[SIZE=2]    5        0        0  Not_testing[/SIZE]
[SIZE=2]Selective self-test flags (0x0):[/SIZE]
[SIZE=2]  After scanning selected spans, do NOT read-scan remainder of disk.[/SIZE]
[SIZE=2]If Selective self-test is pending on power-up, resume after 0 minute delay.
[/SIZE]

Seagate Momentus 7200.4 G-Force 500GB, SATA II (ST9500420ASG)

Code:

smartctl 6.1 2013-03-16 r3800 [x86_64-apple-darwin12.3.0] (local build)
[SIZE=2]Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]=== START OF INFORMATION SECTION ===[/SIZE]
[SIZE=2]Model Family:     Seagate Momentus 7200.4[/SIZE]
[SIZE=2]Device Model:     ST9500420ASG[/SIZE]
[SIZE=2]Serial Number:    5VJ10QP3[/SIZE]
[SIZE=2]LU WWN Device Id: 5 000c50 01924c420[/SIZE]
[SIZE=2]Firmware Version: 0002SDM1[/SIZE]
[SIZE=2]User Capacity:    500,107,862,016 bytes [500 GB][/SIZE]
[SIZE=2]Sector Size:      512 bytes logical/physical[/SIZE]
[SIZE=2]Rotation Rate:    7200 rpm[/SIZE]
[SIZE=2]Device is:        In smartctl database [for details use: -P show][/SIZE]
[SIZE=2]ATA Version is:   ATA8-ACS T13/1699-D revision 4[/SIZE]
[SIZE=2]SATA Version is:  SATA 2.6, 3.0 Gb/s[/SIZE]
[SIZE=2]Local Time is:    Sat Dec 21 19:32:26 2013 CET[/SIZE]
[SIZE=2]SMART support is: Available - device has SMART capability.[/SIZE]
[SIZE=2]SMART support is: Enabled[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]=== START OF ENABLE/DISABLE COMMANDS SECTION ===[/SIZE]
[SIZE=2]SMART Enabled.[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]=== START OF READ SMART DATA SECTION ===[/SIZE]
[SIZE=2]SMART overall-health self-assessment test result: PASSED[/SIZE]
[SIZE=2]See vendor-specific Attribute list for marginal Attributes.[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]General SMART Values:[/SIZE]
[SIZE=2]Offline data collection status:  (0x00)    Offline data collection activity[/SIZE]
[SIZE=2]                    was never started.[/SIZE]
[SIZE=2]                    Auto Offline Data Collection: Disabled.[/SIZE]
[SIZE=2]Self-test execution status:      ( 247)    Self-test routine in progress...[/SIZE]
[SIZE=2]                    70% of test remaining.[/SIZE]
[SIZE=2]Total time to complete Offline [/SIZE]
[SIZE=2]data collection:         (    0) seconds.[/SIZE]
[SIZE=2]Offline data collection[/SIZE]
[SIZE=2]capabilities:              (0x73) SMART execute Offline immediate.[/SIZE]
[SIZE=2]                    Auto Offline data collection on/off support.[/SIZE]
[SIZE=2]                    Suspend Offline collection upon new[/SIZE]
[SIZE=2]                    command.[/SIZE]
[SIZE=2]                    No Offline surface scan supported.[/SIZE]
[SIZE=2]                    Self-test supported.[/SIZE]
[SIZE=2]                    Conveyance Self-test supported.[/SIZE]
[SIZE=2]                    Selective Self-test supported.[/SIZE]
[SIZE=2]SMART capabilities:            (0x0003)    Saves SMART data before entering[/SIZE]
[SIZE=2]                    power-saving mode.[/SIZE]
[SIZE=2]                    Supports SMART auto save timer.[/SIZE]
[SIZE=2]Error logging capability:        (0x01)    Error logging supported.[/SIZE]
[SIZE=2]                    General Purpose Logging supported.[/SIZE]
[SIZE=2]Short self-test routine [/SIZE]
[SIZE=2]recommended polling time:      (   2) minutes.[/SIZE]
[SIZE=2]Extended self-test routine[/SIZE]
[SIZE=2]recommended polling time:      ( 111) minutes.[/SIZE]
[SIZE=2]Conveyance self-test routine[/SIZE]
[SIZE=2]recommended polling time:      (   3) minutes.[/SIZE]
[SIZE=2]SCT capabilities:            (0x103f)    SCT Status supported.[/SIZE]
[SIZE=2]                    SCT Error Recovery Control supported.[/SIZE]
[SIZE=2]                    SCT Feature Control supported.[/SIZE]
[SIZE=2]                    SCT Data Table supported.[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Attributes Data Structure revision number: 10[/SIZE]
[SIZE=2]Vendor Specific SMART Attributes with Thresholds:[/SIZE]
[SIZE=2]ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE[/SIZE]
[SIZE=2]  1 Raw_Read_Error_Rate     0x000f   116   099   006    Pre-fail  Always       -       110673618[/SIZE]
[SIZE=2]  3 Spin_Up_Time            0x0003   099   098   085    Pre-fail  Always       -       0[/SIZE]
[SIZE=2]  4 Start_Stop_Count        0x0032   094   094   020    Old_age   Always       -       6811[/SIZE]
[SIZE=2]  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0[/SIZE]
[SIZE=2]  7 Seek_Error_Rate         0x000f   071   060   030    Pre-fail  Always       -       68932492021[/SIZE]
[SIZE=2]  9 Power_On_Hours          0x0032   096   088   000    Old_age   Always       -       4222[/SIZE]
[SIZE=2] 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0[/SIZE]
[SIZE=2] 12 Power_Cycle_Count       0x0032   097   037   020    Old_age   Always       -       4084[/SIZE]
[SIZE=2]184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0[/SIZE]
[SIZE=2]187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0[/SIZE]
[SIZE=2]188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0[/SIZE]
[SIZE=2]189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0[/SIZE]
[SIZE=2]190 Airflow_Temperature_Cel 0x0022   064   039   045    Old_age   Always   In_the_past 36 (1 13 36 20 0)[/SIZE]
[SIZE=2]191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0[/SIZE]
[SIZE=2]192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       156[/SIZE]
[SIZE=2]193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       1028553[/SIZE]
[SIZE=2]194 Temperature_Celsius     0x0022   036   061   000    Old_age   Always       -       36 (243 52 0 0 0)[/SIZE]
[SIZE=2]195 Hardware_ECC_Recovered  0x001a   037   032   000    Old_age   Always       -       110673618[/SIZE]
[SIZE=2]197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0[/SIZE]
[SIZE=2]198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0[/SIZE]
[SIZE=2]199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0[/SIZE]
[SIZE=2]240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       35948876277327[/SIZE]
[SIZE=2]241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1967106113[/SIZE]
[SIZE=2]242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2310138307[/SIZE]
[SIZE=2]254 Free_Fall_Sensor        0x0032   001   001   000    Old_age   Always       -       455[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Error Log Version: 1[/SIZE]
[SIZE=2]No Errors Logged[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Self-test log structure revision number 1[/SIZE]
[SIZE=2]Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error[/SIZE]
[SIZE=2]# 1  Extended offline    Self-test routine in progress 70%      4222         -[/SIZE]
[SIZE=2]# 2  Short offline       Completed without error       00%      4212         -[/SIZE]
[SIZE=2]# 3  Short offline       Completed without error       00%      4209         -[/SIZE]
[SIZE=2]# 4  Short offline       Completed without error       00%      4208         -[/SIZE]
[SIZE=2]# 5  Extended offline    Aborted by host               80%     10234         -[/SIZE]
[SIZE=2]
[/SIZE]
[SIZE=2]SMART Selective self-test log data structure revision number 1[/SIZE]
[SIZE=2] SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS[/SIZE]
[SIZE=2]    1        0        0  Not_testing[/SIZE]
[SIZE=2]    2        0        0  Not_testing[/SIZE]
[SIZE=2]    3        0        0  Not_testing[/SIZE]
[SIZE=2]    4        0        0  Not_testing[/SIZE]
[SIZE=2]    5        0        0  Not_testing[/SIZE]
[SIZE=2]Selective self-test flags (0x0):[/SIZE]
[SIZE=2]  After scanning selected spans, do NOT read-scan remainder of disk.[/SIZE]
[SIZE=2]If Selective self-test is pending on power-up, resume after 0 minute delay.[/SIZE]

Was sind Eure Erfahrungen und Empfehlungen zu diesem Problem?

off-road-biker · 21.12.13

Wuchtbrumme · 23.12.13

das scheint mir doch ein Softwareproblem zu sein; schau mal, wie begrenzt die Grafikfehler auf Inhalte (Video, Webseite) sind, sie ragen nicht etwa in die Menüstruktur hinein. Da würde ich mir noch einmal einen clean install überlegen und keine Einstellungen oder Programme aus der jetzigen Installation übernehmen. Beim MBP 2010 bietet sich an, den Grafikkartenwechsel über die Mac-eigene Funktion in den Energie-Systemeinstellungen zum dynamischen Grafikkartenwechsel zu deaktivieren und dann gfxCardStatus zu installieren, wo man diese Funktion anmacht. Der Effekt davon ist, dass das System beim Booten nicht schon selbst dynamisch wechselt, sondern erst dann, wenn alle notwendigen Komponenten bereits geladen sind (jedenfalls kann ich es mir nicht anders erklären).
Deine Seagate ist übrigens schon ziemlich ausgelutscht, mal in Kürze über etwas Frischfleisch nachdenken.

off-road-biker · 24.12.13

@Wuchtbrumme
Du meinst also, dass mit den beiden Grafikkarten alles i.O. ist?

Hab so gut wie möglich alle alten Programme rausgeschmissen oder upgedatet.
Ebenso deren .plist so gut wie möglich gelöscht. etc. pp.

Das Programm gfxCard hab ich schon ausprobiert, aber keinen Vorteil erkannt.
Lediglich zur Identifizierung des Problems war es hilfreich.
Hab nun in den Energieeinstellungen den autom. Wechsel abgehakt und nun wo niemals die integrierte Grafikkarte arbeitet keine Probleme. Aber das kann doch nicht die Lösung sein! :.(

Was meinst du mit ausgelutscht??? Verstehe ich nicht.
Bitte mehr Details und woran du das erkennst.

Danke vorab!

Wuchtbrumme · 24.12.13

Ich habe geschrieben, wie das mit gfxCardStatus gemeint ist - ist Deine Sache, ob Du dem Vorschlag folgst.

Wg. der Seagate, schau bei Parameter 193 auf den Value, der bei über 1 Million liegt. Ich habe jetzt die Anzahl der spezifizierten Unload-Cycles der Seagate nicht im Kopf (schau einfach selbst ins White Paper), aber erfahrungsgemäß liegt das oft bei knapp 300.000 bei Notebook-Platten und deutlich weniger bei Desktop-Platten. Ist ein unkritischer Wert, er geht nicht in die Beurteilung des Gesundheitsstatus der Platte ein, aber wenn er so überbordend hoch ist, ist es der Gesundheit auch nicht förderlich, weil es einfach altersmäßiger Streß ist. Deswegen schrieb ich "ausgelutscht" und habe nicht kaputt geschrieben. Jetzt alles klar?

heldausberlin · 16.01.14

Gleiches Problem hier. Zwei MBPs Mid 2010. Eins davon hat exakt das gleiche Problem. Habe softwareseitig schon alles versucht, einschließlich 10.9.1 neu installiert. Hat bisher nichts geholfen.

gfxCard verwende ich ebenfalls als Zwischenlösung. Ist aber nur eine Notlösung, weil unter Batteriebetrieb äußerst stromfressend. Dann hoffen wir mal, dass es noch häufiger auftaucht, damit Apple darauf reagiert.

off-road-biker · 17.01.14

Wuchtbrumme schrieb:
Wg. der Seagate, schau bei Parameter 193 auf den Value, der bei über 1 Million liegt. Ich habe jetzt die Anzahl der spezifizierten Unload-Cycles der Seagate nicht im Kopf (schau einfach selbst ins White Paper), aber erfahrungsgemäß liegt das oft bei knapp 300.000 bei Notebook-Platten und deutlich weniger bei Desktop-Platten. Ist ein unkritischer Wert, er geht nicht in die Beurteilung des Gesundheitsstatus der Platte ein, aber wenn er so überbordend hoch ist, ist es der Gesundheit auch nicht förderlich, weil es einfach altersmäßiger Streß ist. Deswegen schrieb ich "ausgelutscht" und habe nicht kaputt geschrieben. Jetzt alles klar?

Ne, nichts klar. Verstehe nur Bahnhof. Kannst du das auch im Nicht-IT-Deutsch bitte erklären.
Was bedeuten dieser Parameter 193 Load_Cycle_Count?
Und was sind "spezifizierte Unload-Cycles"?
White Paper? Keine Ahnung was das sein soll.

heldausberlin schrieb:
Gleiches Problem hier. Zwei MBPs Mid 2010. Eins davon hat exakt das gleiche Problem. Habe softwareseitig schon alles versucht, einschließlich 10.9.1 neu installiert. Hat bisher nichts geholfen.

Warst du damit schon bei Apple oder Händler?

pti'Luc · 21.03.14

Bekanntes Problem beim MacBook Pro MID 2010 in 15 Zoll: TS4088
http://support.apple.com/kb/TS4088?viewlocale=de_DE&locale=de_DE

Ein neues Logicboard von Apple hilft hier.

Suche

Suche

[10.9 Mavericks] MBP 15" Mid 2010: Grafikprobleme seit Mavericks

off-road-biker

Empire

off-road-biker

Empire

Wuchtbrumme

Golden Noble

off-road-biker

Empire

Wuchtbrumme

Golden Noble

heldausberlin

Granny Smith

off-road-biker

Empire

pti'Luc

Fairs Vortrefflicher

Wir schützen Ihre Privatsphäre

Informationen auf einem Gerät speichern und/oder abrufen

Personalisierte Anzeigen und Inhalte, Anzeigen- und Inhaltsmessungen, Erkenntnisse über Zielgruppen und Produktentwicklungen (Optionale Cookies)

Datenübermittlung an Partner in anderen Staaten (Drittanbieter-Cookies)