[10.8 Mountain Lion] FusionDrive hängt "Disabled automatic stack shots because audio IO is active"

[ruben ruben]

Hallo,

ich habe ein selbsterstelltes FusionDrive, das aus einer 128 Gb SSD und einer 3 TB HD besteht. Dieses ist partitioniert. Auf der kleineren Partition (ca. 280 GB) ist das Betriebssystem installiert. Immer öfter bleibt der Rechner hängen (Spinning ball) - nach einiger zeit (ca. 30 - 50 Sekunden) geht es mit einem Festplattengeräusch dann weiter. In der Konsole gibt es immer wieder folgende Meldung:

14.10.13 10:35:44,448 coreaudiod[286]: Disabled automatic stack shots because audio IO is active
14.10.13 10:35:44,471 coreaudiod[286]: Enabled automatic stack shots because audio IO is inactive
14.10.13 10:35:44,527 coreaudiod[286]: Disabled automatic stack shots because audio IO is active
14.10.13 10:35:44,550 coreaudiod[286]: Enabled automatic stack shots because audio IO is inactive
14.10.13 10:35:44,558 coreaudiod[286]: Disabled automatic stack shots because audio IO is active
14.10.13 10:35:44,662 coreaudiod[286]: Enabled automatic stack shots because audio IO is inactive
14.10.13 10:36:23,168 coreaudiod[286]: Disabled automatic stack shots because audio IO is active
14.10.13 10:36:28,883 coreaudiod[286]: Enabled automatic stack shots because audio IO is inactive
14.10.13 10:36:32,061 coreaudiod[286]: Disabled automatic stack shots because audio IO is active
14.10.13 10:36:48,091 coreaudiod[286]: Enabled automatic stack shots because audio IO is inactive
14.10.13 10:36:55,888 coreaudiod[286]: Disabled automatic stack shots because audio IO is active

Weiß jemand etwa damit anzufangen ?

 

[wheeler]

Hast du evtl Altlasten auf deinem Rechner? In der Form, dass du mal irgendwelche Audiowandler, Audiohardware, externe Soundkarten oder Ähnliches installiert hattest?

 

[Promis]

Es dürfte fast keinen User mit 10.8. geben, der diese Meldung nicht in seiner Konsole hat. Bei irgendeiner Version von 10.8., ich glaube 10.8.4, fing diese Ausgabe in der Konsole an. Sie ist also nicht für die Hänger verantwortlich, sonst hätte jeder, inklusive mir, ständig Hänger. Es muss also etwas anderes für die Hänger verantwortlich sein.

Damit wir hier klarer sehen, lade dir mal das kostenlose Programm EtreCheck runter und poste die Ergebnisse hier. Bitte auch im Code.

 

[Dr.Death]

Hi,

folgender Beitrag hat mir bei der gleichen Sache geholfen:

https://discussions.apple.com/message/22182528#22182528

Edit: Damit verschwinden diese Log Einträge, ob es Deinen "Beachball" Problem beseitigt, weiß ich leider nicht.

 

[ruben ruben]

Hallo,

danke für die Antworten. Leider funktioniert das Abonnement hier nicht, d.h. ich bekomme keine e-mails, wenn neue Beiträge geschrieben werden. Ich denke auch, dass der Freeze (Beachball) nichts mit dieser meldung zu tun hat. Ich habe schon öfters von I/O-Fehlern im Zusammenhang mit selbsterstellten FusionDrives gehört und es wirkt tatsächlich so, als ob der Rechner kurzzeitig nicht auf die HD zugreifen kann. Nach ein paar Sekunden geht es dann mit vernehmbarem Festplattengeräusch weiter. Die S.M.A.R.T - Werte der beiden Komponeneten des FusionDrives sind natürlich OK, das habe ich überprüft.
Hier also der EtreCheck-Log:

   [B]Hardware Information:[/B]
     iMac (21.5-inch, Mid 2011)
     iMac - model: iMac12,1
     1 2.7 GHz Intel Core i5 CPU: 4 cores
     12 GB RAM
 

 [B]Video Information:[/B]
     AMD Radeon HD 6770M - VRAM: 512 MB
 

 [B]Startup Items:[/B]
     DynDNSUpdater - Path: /Library/StartupItems/DynDNSUpdater
     EyeConnect - Path: /Library/StartupItems/EyeConnect
     HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
     Sudochmod - Path: /Library/StartupItems/Sudochmod
 

 [B]System Software:[/B]
     OS X 10.8.5 (12F45) - Uptime: 0 days 0:25:57
 

 [B]Disk Information:[/B]
     Hitachi HUA723030ALA640 disk2 : (3 TB)
         disk2s1 (disk2s1) <not mounted>: 209,7 MB 
         disk2s2 (disk2s2) <not mounted>: 201,87 GB 
         Boot OS X (disk2s3) <not mounted>: 650 MB 
         HD (disk2s4) /Volumes/HD: 2,79 TB (850,9 GB free)
 

     OCZ-VERTEX3 MI disk1 : (120,03 GB)
         disk1s1 (disk1s1) <not mounted>: 209,7 MB 
         disk1s2 (disk1s2) <not mounted>: 119,69 GB 
         Boot OS X (disk1s3) <not mounted>: 134,2 MB 
 

     HL-DT-STDVDRW  GA32N  
 

 [B]USB Information:[/B]
     Apple Computer, Inc. IR Receiver 
 

     Apple Internal Memory Card Reader 
 

     Apple Inc. FaceTime HD Camera (Built-in) 
 

     JMicron USB to ATA/ATAPI Bridge 500,11 GB
         disk0s1 (disk0s1) <not mounted>: 209,7 MB 
         AKTUELL (disk0s2) /Volumes/AKTUELL: 499,25 GB (190,26 GB free)
 

     Canon iP5200R 
 

     EPSON EPSON Scanner 
 

     Apple, Inc. Keyboard Hub 
         Apple, Inc Apple Keyboard 
 

     Apple Inc. BRCM2046 Hub 
         Apple Inc. Bluetooth USB Host Controller 
 

 [B]FireWire Information:[/B]
     inXtron, Inc. OEM ATA Device 00 800mbit - 800mbit max 
         disk4s1 (disk4s1) <not mounted>: 209,7 MB 
         Backup (disk4s2) /Volumes/Backup: 3 TB (151,94 GB free)
 

 [B]Thunderbolt Information:[/B]
     Apple Inc. thunderbolt_bus
 

 [B]Kernel Extensions:[/B]
     at.obdev.nke.LittleSnitch    (3876)
     com.rogueamoeba.InstantOn    (6.0.3)
     com.oxsemi.driver.OxsemiDeviceType00    (1.29.4)
     com.globaldelight.driver.BoomDevice    (1.1)
     com.rogueamoeba.InstantOnCore    (6.0.3)
     com.iospirit.driver.rbiokithelper    (1.8.0)
     com.Cycling74.driver.Soundflower    (1.5.3)
     com.waves.driver.soundgrid    (2.0.0)
     com.lobotomo.IPSecuritasFilter    (4.0)
     com.parallels.kext.prl_usb_connect    (7.0
     com.parallels.kext.prl_hypervisor    (7.0
     com.parallels.kext.prl_hid_hook    (7.0
     com.parallels.kext.prl_netbridge    (7.0
     com.parallels.kext.prl_vnic    (7.0
     com.bresink.driver.BRESINKx86Monitoring    (8.0)
 

 [B]Problem System Launch Daemons:[/B]
 

 [B]Problem System Launch Agents:[/B]
 

 [B]Launch Daemons:[/B]
     [loaded]    at.obdev.littlesnitchd.plist
     [loaded]    com.adobe.fpsaud.plist
     [loaded]    com.adobe.SwitchBoard.plist
     [loaded]    com.barebones.authd.plist
     [loaded]    com.bjango.istatmenusdaemon.plist
     [loaded]    com.bombich.ccc.plist
     [loaded]    com.bombich.ccc.scheduledtask.B61A321C-489A-4F1E-8306-F395DC61A699.plist
     [loaded]    com.bresink.system.securityagent.plist
     [loaded]    com.cocoatech.pathfinder.SMFHelper7.plist
     [loaded]    com.equinux.VPNTracker7.agent.plist
     [loaded]    com.freemacsoft.appcleanerd.plist
     [loaded]    com.google.keystone.daemon.plist
     [loaded]    com.lobotomo.IPSecuritasDaemon.plist
     [loaded]    com.micromat.TechToolProDaemon.plist
     [loaded]    com.microsoft.office.licensing.helper.plist
     [loaded]    com.parallels.desktop.launchdaemon.plist
     [loaded]    com.prosofteng.DriveGenius.locum.plist
     [loaded]    com.teamviewer.teamviewer_service.plist
     [loaded]    de.meilenstein.MSTFirstRunInstaller.plist
     [loaded]    de.meilenstein.MSTHostPreferences.plist
     [loaded]    de.meilenstein.supportfiles.plist
     [loaded]    org.macosforge.xquartz.privileged_startx.plist
     [loaded]    org.tcpdump.chmod_bpf.plist
 

 [B]Launch Agents:[/B]
     [loaded]    at.obdev.LittleSnitchUIAgent.plist
     [loaded]    com.bjango.istatmenusagent.plist
     [loaded]    com.google.keystone.agent.plist
     [loaded]    com.lost.smoke.plist
     [loaded]    com.micromat.TechToolProAgent.plist
     [loaded]    com.parallels.desktop.launch.plist
     [loaded]    com.parallels.DesktopControlAgent.plist
     [loaded]    com.parallels.vm.prl_pcproxy.plist
     [loaded]    com.teamviewer.teamviewer.plist
     [loaded]    com.teamviewer.teamviewer_desktop.plist
     [loaded]    org.macosforge.xquartz.startx.plist
 

 [B]User Launch Agents:[/B]
     [loaded]    com.adobe.AAM.Updater-1.0.plist
     [loaded]    com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
     [loaded]    com.bombich.ccc-user-agent.plist
     [loaded]    com.linotype.FontFolderProtector.plist
     [loaded]    com.prosofteng.DGMonitor.plist
     [loaded]    com.spotify.webhelper.plist
     [loaded]    ws.agile.1PasswordAgent.plist
 

 [B]User Login Items:[/B]
     Boom
     iTunesHelper
     BusyCalAlarm
     Rogue Amoeba Schedule Helper
     UltralinguaHotkey
     TotalSpaces
     Dropbox
     AppCleaner Helper
     Fritz.mac Suite
     PsstDaemon
     Caffeine
     Contacts Sync For Google Gmail
     XtraFinder
 

 [B]3rd Party Preference Panes:[/B]
     RCDefaultApp
     Flash Player
     Flip4Mac WMV
     HDD Fan Control
     Perian
     Quark Update Preferences
     TechTool Protection
     Xmarks for Safari
 

 [B]Internet Plug-ins:[/B]
     AdobePDFViewer.plugin
     AdobePDFViewerNPAPI.plugin
     Flash Player.plugin
     FlashPlayer-10.6.plugin
     Flip4Mac WMV Plugin.plugin
     iPhotoPhotocast.plugin
     JavaAppletPlugin.plugin
     QuickTime Plugin.plugin
     SharePointBrowserPlugin.plugin
     Silverlight.plugin
     Unity Web Player.plugin
 

 [B]User Internet Plug-ins:[/B]
     Flash Player.plugin
     FlashPlayer-10.6.plugin
 

 [B]Bad Fonts:[/B]
     None
 

 [B]Top Processes by CPU:[/B]
         14%    firefox
          1%    WindowServer
          1%    fontd
          1%    EtreCheck
          1%    SystemUIServer
          0%    prl_disp_service
          0%    Dock
          0%    HDDFanControlDaemon
          0%    iStatMenusDaemon
          0%    coreservicesd
 

 [B]Top Processes by Memory:[/B]
     750 MB       firefox
     270 MB       museek
     258 MB       mds
     123 MB       iSoul
     98 MB        Fritz.mac Suite
     86 MB        plugin-container
     86 MB        BusyCal
     74 MB        SystemUIServer
     74 MB        WindowServer
     74 MB        Cobook
 

 [B]Virtual Memory Statistics[/B]
     7.33 GB      Free RAM
     2.54 GB      Active RAM
     832 MB       Inactive RAM
     1.32 GB      Wired RAM
     705 MB       Page-ins
     0 B          Page-outs

 

[Wuchtbrumme]

poste mir mal bitte die SMART-Werte (nicht die Stati!)...

 

[ruben ruben]

Here you go:

location: /dev/disk2
partition count: 1
partitions: HD, 
SMART Support: Supported
Last SMART Error: *not set*
Model Family: Hitachi Ultrastar 7K3000
Model: Hitachi HUA723030ALA640
Serial Number: MK0331YHG93X1A
Firmware Version: MKAOA580
Capacity: 3.00 TB
ATA Version: 8
SATA Version: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Rotation Rate: 7200 rpm
Health: Passed
Overall Health: PASSED
Offline Data Status: 84
Self Test Status: 0
Offline Data Collection Time: 27844
Data Collection Capabilities: 5B
SMART Capabilities: 3
Error Logging Capabilities: 1
Short Self Test Time: 1
Long Self Test Time: 464
Conveyance Self Test Time: 0
Attribute Log Revision: 16
Attribute Count: 17
Attributes:
ID#   ATTRIBUTE NAME                         FLAG       VALUE   WORST   THRESH  TYPE         UPDATED     FAILED    RAW VALUE
1     Raw Read Error Rate                    0x000B     100     100     016     Pre-fail     Always      Never     0
2     Throughput Performance                 0x0005     136     136     054     Pre-fail     Offline     Never     83
3     Spin Up Time                           0x0007     130     130     024     Pre-fail     Always      Never     573
4     Start/Stop Count                       0x0012     100     100     000     Old age      Always      Never     1181
5     Reallocated Sector Count               0x0033     100     100     005     Pre-fail     Always      Never     0
7     Seek Error Rate                        0x000B     100     100     067     Pre-fail     Always      Never     0
8     Seek Time Performance                  0x0005     133     133     020     Pre-fail     Offline     Never     27
9     Power On Hours                         0x0012     100     100     000     Old age      Always      Never     3762
10    Spin Retry Count                       0x0013     100     100     060     Pre-fail     Always      Never     0
12    Power Cycle Count                      0x0032     100     100     000     Old age      Always      Never     988
192   Power Off Retract Count                0x0032     099     099     000     Old age      Always      Never     1217
193   Load Cycle Count                       0x0012     099     099     000     Old age      Always      Never     1217
194   Temperature Celsius                    0x0002     136     136     000     Old age      Always      Never     44
196   Reallocated Event Count                0x0032     100     100     000     Old age      Always      Never     0
197   Current Pending Sector Count           0x0022     100     100     000     Old age      Always      Never     0
198   Offline Uncorrectable Sector Count     0x0008     100     100     000     Old age      Offline     Never     0
199   UDMA CRC Error Count                   0x000A     200     200     000     Old age      Always      Never     0
Error Log Version: 1
Error Count: 2
Error Log: 
Error 2 occured at disk power-on lifetime: 76 hours
  When the command that caused the error occurred, the device was in standby mode.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  02 51 00 00 00 00 00
  Error: Unknown
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  10 00 01 01 00 00 A0 FF      00:55:04.646  RECALIBRATE [OBS-4]
  10 00 01 01 00 00 A0 FF      00:55:04.091  RECALIBRATE [OBS-4]
  10 00 01 01 00 00 A0 FF      00:55:04.062  RECALIBRATE [OBS-4]
  10 00 00 00 00 00 E0 FF      00:55:03.499  RECALIBRATE [OBS-4]
  10 00 00 00 00 00 E0 08      00:54:55.237  RECALIBRATE [OBS-4]

Error 1 occured at disk power-on lifetime: 75 hours
  When the command that caused the error occurred, the device was in standby mode.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  02 51 00 00 00 00 00
  Error: Unknown
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  10 00 01 01 00 00 A0 FF      00:15:34.568  RECALIBRATE [OBS-4]
  10 00 01 01 00 00 A0 FF      00:15:34.013  RECALIBRATE [OBS-4]
  10 00 01 01 00 00 A0 FF      00:15:33.984  RECALIBRATE [OBS-4]
  10 00 00 00 00 00 E0 FF      00:15:33.421  RECALIBRATE [OBS-4]
  10 00 00 00 00 00 E0 08      00:15:21.998  RECALIBRATE [OBS-4]

Self Test Log Revision: 1
Self Test Log Count: 1
Self Test Log:

Num  Test_Description    Status                   Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error         0%         1         -

location: /dev/disk3
partition count: 1
partitions: Mac OS X, 
SMART Support: Supported
Last SMART Error: *not set*
Model Family: SandForce Driven SSDs
Model: OCZ-VERTEX3 MI
Serial Number: OCZ-F50TW72MC3NEBNLN
Firmware Version: 2.25
Capacity: 120 GB
ATA Version: 8
SATA Version: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Rotation Rate: Solid State Device
Health: Passed
Overall Health: PASSED
Offline Data Status: 0
Self Test Status: 0
Offline Data Collection Time: 0
Data Collection Capabilities: 7B
SMART Capabilities: 3
Error Logging Capabilities: 1
Short Self Test Time: 1
Long Self Test Time: 48
Conveyance Self Test Time: 2
Attribute Log Revision: 10
Attribute Count: 22
Attributes:
ID#   ATTRIBUTE NAME                         FLAG       VALUE   WORST   THRESH  TYPE         UPDATED     FAILED    RAW VALUE
1     Raw Read Error Rate                    0x000F     106     106     050     Pre-fail     Always      Never     0
5     Retired Block Count                    0x0033     100     100     003     Pre-fail     Always      Never     0
9     Power On Hours and Msec                0x0032     099     099     000     Old age      Always      Never     1640
12    Power Cycle Count                      0x0032     098     098     000     Old age      Always      Never     2213
171   Program Fail Count                     0x0032     000     000     000     Old age      Always      Never     0
172   Erase Fail Count                       0x0032     000     000     000     Old age      Always      Never     0
174   Unexpected Power Loss Count            0x0030     000     000     000     Old age      Offline     Never     71
177   Wear Range Delta                       0x0000     000     000     000     Old age      Offline     Never     1
181   Program Fail Count                     0x0032     000     000     000     Old age      Always      Never     0
182   Erase Fail Count                       0x0032     000     000     000     Old age      Always      Never     0
187   Reported Uncorrectable Errors          0x0032     100     100     000     Old age      Always      Never     0
194   Temperature Celsius                    0x0022     030     030     000     Old age      Always      Never     30
195   ECC Uncorrectable Error Count          0x001C     120     120     000     Old age      Offline     Never     0
196   Reallocated Event Count                0x0033     100     100     003     Pre-fail     Always      Never     0
201   Uncorrectable Soft Read Error Rate     0x001C     120     120     000     Old age      Offline     Never     0
204   Soft ECC Correctable Rate              0x001C     120     120     000     Old age      Offline     Never     0
230   Life_Curve_Status                      0x0013     100     100     000     Pre-fail     Always      Never     100
231   SSD_Life_Left                          0x0013     100     100     010     Pre-fail     Always      Never     0
233   SandForce_Internal                     0x0000     000     000     000     Old age      Offline     Never     3310
234   SandForce_Internal                     0x0032     000     000     000     Old age      Always      Never     3774
241   Lifetime_Writes_GiB                    0x0032     000     000     000     Old age      Always      Never     3774
242   Lifetime_Reads_GiB                     0x0032     000     000     000     Old age      Always      Never     7012
Error Log Version: 0
Error Count: 0
Error Log: 
No errors logged.
Self Test Log Revision: 0
Self Test Log Count: 0
Self Test Log:

No self tests logged.

 

[wheeler]

Also, bei dir läuft AppCleaner, Software von RogueAmoeba, die tief ins System eingreift und verschiedener anderer Kram, den ich erstmal rausschmeißen würde. Vor allem, wenn es evtl. nicht die neueste Version ist.

 

[Wuchtbrumme]

die Festplatte sieht soweit einwandfrei aus - die Recalibration nach 76h könnte ganz normales "Burn-in" seitens der Firmware sein, das macht auch Seagate gerne (und Hitachi habe ich schon seit einiger Zeit nicht).

Bei der SSD finde ich aber
"Unexpected Power Loss Count" extrem auffällig. Ich bin auf einen Forumseintrag (http://www.computerbase.de/forum/archive/index.php/t-972072.html) gestoßen, da wird von einem Power Cycle und bereits 72 Unexpected Power Losses gesprochen.

Mir fällt auch wieder ein, was die c't dieses Jahr zu Sandforce SSDs meinte...

Zusammenfassend würde ich mal das Energiesparen abschalten, vielleicht hat das was mit der Fehlermeldung zu tun (ich habe aber kein Fusion Drive).