- Registriert
- 21.12.08
- Beiträge
- 1
Hallo zusammen und bitte um Hilfe!
Mein G4 MDD, Dual 1.25 GHz, lief die letzten Jahre absolut problemlos.
Nun, seit Kurzem stürzen so ziemlich alle Programme nach kurzer Zeit ab, bzw. der Bildschirm wird dunkel und der G4 verlangt einen Neustart.
Eine neue HD und neues System (10.4.11) blieben erfolglos. Hardwaretest alles OK! RAM - OK!
Bin ratlos, - bitte um Tipps!
Im Fehlerprotokoll steht folgendes
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x0000000000000010 PC=0x00000000000665E4
Latest crash info for cpu 1:
Exception state (sv=0x3D959280)
PC=0x000665E4; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00066570; R1=0x17483C90; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000003 0x00070640 0x0006271C 0x000A86F0 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x3D959280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3D930780)
PC=0x903ECB48; MSR=0x4000F030; DAR=0xE1AE8000; DSISR=0x40000000; LR=0x9045A77C; R1=0xBFFFEE80; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 1 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x3D959280)
PC=0x000665E4; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00066570; R1=0x17483C90; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000003 0x00070640 0x0006271C 0x000A86F0 0x000ABB80
Exception state (sv=0x3D930780)
PC=0x903ECB48; MSR=0x4000F030; DAR=0xE1AE8000; DSISR=0x40000000; LR=0x9045A77C; R1=0xBFFFEE80; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPCModel: PowerMac3,6, BootROM 4.4.8f2, 2 processors, PowerPC G4 (3.3), 1.25 GHz, 1 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 64 MB
Memory Module: DIMM0/J21, 512 MB, DDR SDRAM, PC2600U-25330
Memory Module: DIMM1/J22, 512 MB, DDR SDRAM, PC2600U-25330
Modem: Dash2, Euro, V.92, 1.0F, APPLE VERSION 2.6.6
Network Service: Ethernet (integriert), Ethernet, en0
PCI Card: usb, usb, SLOT-3
PCI Card: usb, usb, SLOT-3
PCI Card: pci1838,1074, SLOT-3
PCI Card: pci9004,7850, sppci_scsi_bus, SLOT-5
Parallel ATA Device: PHILIPS CDD5101
Parallel ATA Device: HL-DT-ST DVDRAM GSA-4120B, 35.13 MB
Parallel ATA Device: Maxtor 6Y080L0, 76.33 GB
USB Device: Keyboard Mouse Set, MLK, Up to 1.5 Mb/sec, 500 mA
USB Device: USB2.0 Hub Controller, NEC Corporation, Up to 12 Mb/sec, 500 mA
Und wenn sich ein Programm verabschiedet:
Danke für eure Hilfe und lg
Gustl
Mein G4 MDD, Dual 1.25 GHz, lief die letzten Jahre absolut problemlos.
Nun, seit Kurzem stürzen so ziemlich alle Programme nach kurzer Zeit ab, bzw. der Bildschirm wird dunkel und der G4 verlangt einen Neustart.
Eine neue HD und neues System (10.4.11) blieben erfolglos. Hardwaretest alles OK! RAM - OK!
Bin ratlos, - bitte um Tipps!
Im Fehlerprotokoll steht folgendes
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x0000000000000010 PC=0x00000000000665E4
Latest crash info for cpu 1:
Exception state (sv=0x3D959280)
PC=0x000665E4; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00066570; R1=0x17483C90; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000003 0x00070640 0x0006271C 0x000A86F0 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x3D959280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3D930780)
PC=0x903ECB48; MSR=0x4000F030; DAR=0xE1AE8000; DSISR=0x40000000; LR=0x9045A77C; R1=0xBFFFEE80; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 1 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x3D959280)
PC=0x000665E4; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00066570; R1=0x17483C90; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000003 0x00070640 0x0006271C 0x000A86F0 0x000ABB80
Exception state (sv=0x3D930780)
PC=0x903ECB48; MSR=0x4000F030; DAR=0xE1AE8000; DSISR=0x40000000; LR=0x9045A77C; R1=0xBFFFEE80; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPCModel: PowerMac3,6, BootROM 4.4.8f2, 2 processors, PowerPC G4 (3.3), 1.25 GHz, 1 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 64 MB
Memory Module: DIMM0/J21, 512 MB, DDR SDRAM, PC2600U-25330
Memory Module: DIMM1/J22, 512 MB, DDR SDRAM, PC2600U-25330
Modem: Dash2, Euro, V.92, 1.0F, APPLE VERSION 2.6.6
Network Service: Ethernet (integriert), Ethernet, en0
PCI Card: usb, usb, SLOT-3
PCI Card: usb, usb, SLOT-3
PCI Card: pci1838,1074, SLOT-3
PCI Card: pci9004,7850, sppci_scsi_bus, SLOT-5
Parallel ATA Device: PHILIPS CDD5101
Parallel ATA Device: HL-DT-ST DVDRAM GSA-4120B, 35.13 MB
Parallel ATA Device: Maxtor 6Y080L0, 76.33 GB
USB Device: Keyboard Mouse Set, MLK, Up to 1.5 Mb/sec, 500 mA
USB Device: USB2.0 Hub Controller, NEC Corporation, Up to 12 Mb/sec, 500 mA
Und wenn sich ein Programm verabschiedet:
Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Danke für eure Hilfe und lg
Gustl