- Registriert
- 23.10.07
- Beiträge
- 393
Hallo Mädels.
Irgendwie ist nach dem Wechsel zum DAP-1160 meine Verbindung noch schlechter als vorher mit meinem USB Stick.
Kennt sich jemand damit aus?
Habe folgende Einstellungen zur Auswahl:
Wireless Modes
Access Point Mode
AP Client Mode <-- Nutze ich gerade
Bridge Mode
Bridge with AP Mode
Repeater Mode
WISP Client Router Mode
WISP Repeater Mode
Erklährungen:
Wireless Modes
Access Point Mode
In Access Point mode, the DAP-1160 acts as a central connection point for any computer (client) that has a 80.11g
or backward-compatible 80.11b wireless network adapter and is within range of the AP. Clients must use the same
SSID (wireless network name) and channel as the AP in order to connect. If wireless security is enabled on the AP,
the client will need to enter a password to connect to the AP. Multiple clients can connect to the AP at the same time
in Access Point mode.
AP Client Mode
In AP Client mode, the DAP-1160 acts as a wireless network adapter for your Ethernet-enabled device (such as a
game console or a TV set-top box). Connect your Ethernet-enabled device to the AP using an Ethernet cable. AP
Client mode can support multiple wired clients.
Bridge Mode
In Bridge mode, the DAP-1160 wirelessly connects seperate LANs that can’t easily be connected together with a cable.
For example, if there are wired LANs separated by a small courtyard, it would be expensive to bury cable between the
two sides. A better solution is to use two DAP-1160 units to wirelessly connect the two LANs. In Bridge mode, both
DAP-1160 units do not act as APs.
Note: Bridge Mode is not completely specified in Wi-Fi or IEEE standards. It can only work using other DAP-1160
units. Communication with other APs (even other D-Link APs) is not guaranteed.
Bridge with AP Mode
Bridge with AP mod is the same as Bridge mode, but it also acts as an AP. Clients with wireless network adapters
can wirelessly connect to the AP and then connect to the other LAN that the DAP-1160 bridges to.
Note: Bridge with AP Mode is not completely specified in WiFi or IEEE standards. It can only work using other DAP-
1160 units. Communication with other APs (even other D-Link APs) is not guaranteed.
Repeater Mode
Repeater mode increases the range of your wireless network by extending the wireless coverage of another AP or
wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients,
APs, and the wireless router all use the same SSID (wireless network name) and channel.
WISP Client Router Mode
In WISP Client Router mode, the DAP-1160 wirelessly connects to a WISP (Wireless Internet Service Provider) AP.
In this mode, the DAP-1160 also acts as a router for wired clients on your LAN and provides NAT (Network Address
Translation) and a DHCP server to generate IP addresses for wired clients. NAT and the DHCP server allow many
computers to share the same wireless Internet connection.
An example scenario is a WISP subscriber that wants to access their WISP account using wired computers. The wired
computers connect to the DAP-1160, which provides NAT, and then connects to the WISP AP.
WISP Repeater Mode
In WISP Repeater mode, the DAP-1160 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In
this mode, the DAP-1160 also acts as a router for both wireless and wired clients on your LAN. WISP Repeater mode
provides NAT (Network Address Translation) and a DHCP server to generate IP addresses for both wireless and wired
clients. NAT and the DHCP server allow many computers to share the same wireless Internet connection.
An example scenario is a WISP subscriber that wants to use their WISP account in their house, but the signal from the
outdoor WISP AP isn’t strong enough to reach all of the areas in the house. The DAP-1160 can extend the signal from
the outdoor WISP AP and provide access for any wireless clients in the house. In addition, wired clients can connect
to the DAP-1160, thus accessing the outdoor WISP AP.
Ich connecte derzeit mit einem Kabel vom Mac Pro zum Acess Point von D-Link.
30 KB Downloads mit 26 Mbit sind sehr happig.
Warum habe ich zum Acess Point gegriffen? Die USB Adapter Software sorgte für Abstürze des Macs...
Freue mich über jegliche Hilfe.
Irgendwie ist nach dem Wechsel zum DAP-1160 meine Verbindung noch schlechter als vorher mit meinem USB Stick.
Kennt sich jemand damit aus?
Habe folgende Einstellungen zur Auswahl:
Wireless Modes
Access Point Mode
AP Client Mode <-- Nutze ich gerade
Bridge Mode
Bridge with AP Mode
Repeater Mode
WISP Client Router Mode
WISP Repeater Mode
Erklährungen:
Wireless Modes
Access Point Mode
In Access Point mode, the DAP-1160 acts as a central connection point for any computer (client) that has a 80.11g
or backward-compatible 80.11b wireless network adapter and is within range of the AP. Clients must use the same
SSID (wireless network name) and channel as the AP in order to connect. If wireless security is enabled on the AP,
the client will need to enter a password to connect to the AP. Multiple clients can connect to the AP at the same time
in Access Point mode.
AP Client Mode
In AP Client mode, the DAP-1160 acts as a wireless network adapter for your Ethernet-enabled device (such as a
game console or a TV set-top box). Connect your Ethernet-enabled device to the AP using an Ethernet cable. AP
Client mode can support multiple wired clients.
Bridge Mode
In Bridge mode, the DAP-1160 wirelessly connects seperate LANs that can’t easily be connected together with a cable.
For example, if there are wired LANs separated by a small courtyard, it would be expensive to bury cable between the
two sides. A better solution is to use two DAP-1160 units to wirelessly connect the two LANs. In Bridge mode, both
DAP-1160 units do not act as APs.
Note: Bridge Mode is not completely specified in Wi-Fi or IEEE standards. It can only work using other DAP-1160
units. Communication with other APs (even other D-Link APs) is not guaranteed.
Bridge with AP Mode
Bridge with AP mod is the same as Bridge mode, but it also acts as an AP. Clients with wireless network adapters
can wirelessly connect to the AP and then connect to the other LAN that the DAP-1160 bridges to.
Note: Bridge with AP Mode is not completely specified in WiFi or IEEE standards. It can only work using other DAP-
1160 units. Communication with other APs (even other D-Link APs) is not guaranteed.
Repeater Mode
Repeater mode increases the range of your wireless network by extending the wireless coverage of another AP or
wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients,
APs, and the wireless router all use the same SSID (wireless network name) and channel.
WISP Client Router Mode
In WISP Client Router mode, the DAP-1160 wirelessly connects to a WISP (Wireless Internet Service Provider) AP.
In this mode, the DAP-1160 also acts as a router for wired clients on your LAN and provides NAT (Network Address
Translation) and a DHCP server to generate IP addresses for wired clients. NAT and the DHCP server allow many
computers to share the same wireless Internet connection.
An example scenario is a WISP subscriber that wants to access their WISP account using wired computers. The wired
computers connect to the DAP-1160, which provides NAT, and then connects to the WISP AP.
WISP Repeater Mode
In WISP Repeater mode, the DAP-1160 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In
this mode, the DAP-1160 also acts as a router for both wireless and wired clients on your LAN. WISP Repeater mode
provides NAT (Network Address Translation) and a DHCP server to generate IP addresses for both wireless and wired
clients. NAT and the DHCP server allow many computers to share the same wireless Internet connection.
An example scenario is a WISP subscriber that wants to use their WISP account in their house, but the signal from the
outdoor WISP AP isn’t strong enough to reach all of the areas in the house. The DAP-1160 can extend the signal from
the outdoor WISP AP and provide access for any wireless clients in the house. In addition, wired clients can connect
to the DAP-1160, thus accessing the outdoor WISP AP.
Ich connecte derzeit mit einem Kabel vom Mac Pro zum Acess Point von D-Link.
30 KB Downloads mit 26 Mbit sind sehr happig.
Warum habe ich zum Acess Point gegriffen? Die USB Adapter Software sorgte für Abstürze des Macs...
Freue mich über jegliche Hilfe.
