@ottomane Danke für die Warnung
![Smile :) :)](/community/styles/apfeltalk/smilies/SmilingCheeks.png)
.
hab ich jetzt mal geprüft mit Hilfe der Software k-smart und habe folgendes erhalten, ich habe nur leider absolut keine Ahnung was das bedeutet
![Big Grin :D :D](/community/styles/apfeltalk/smilies/Smiling Face.png)
.
/private/var/folders/r2/7__t9m414jv1ql29sf49m0q00000gn/T/AppTranslocation/90CEF700-28B3-4024-8F9C-6751139D1875/d/k-smart.app/Contents/Resources/update-smart-drivedb: download from trunk failed (HTTP error)
Examining /dev/disk0
smartctl 6.4 2015-06-04 r4109 [x86_64-apple-darwin10.8.0] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar Z5K500
Device Model: APPLE HDD HTS545050A7E362
Firmware Version: GG2AB990
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jul 3 13:29:38 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 109) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 218 218 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2941
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 2296
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2941
160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 816043786277
193 Load_Cycle_Count 0x0012 081 081 000 Old_age Always - 196904
194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 7/45)
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 093 093 000 Old_age Always - 1815
SMART Error Log Version: 1
ATA Error Count: 5
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 occurred at disk power-on lifetime: 1686 hours (70 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f0 54 d0 05 Error: UNC 8 sectors at LBA = 0x05d054f0 = 97539312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f0 54 d0 40 00 00:01:13.855 READ DMA EXT
25 00 08 f0 54 d0 40 00 00:01:10.321 READ DMA EXT
25 00 08 f0 54 d0 40 00 00:01:06.788 READ DMA EXT
25 00 08 f0 54 d0 40 00 00:01:03.255 READ DMA EXT
2f 00 01 10 00 00 00 00 00:01:03.254 READ LOG EXT
Error 4 occurred at disk power-on lifetime: 1686 hours (70 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f0 54 d0 05 Error: UNC 8 sectors at LBA = 0x05d054f0 = 97539312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f0 54 d0 40 00 00:01:10.321 READ DMA EXT
25 00 08 f0 54 d0 40 00 00:01:06.788 READ DMA EXT
25 00 08 f0 54 d0 40 00 00:01:03.255 READ DMA EXT
2f 00 01 10 00 00 00 00 00:01:03.254 READ LOG EXT
60 08 80 f0 54 d0 40 00 00:00:59.736 READ FPDMA QUEUED
Error 3 occurred at disk power-on lifetime: 1685 hours (70 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f0 54 d0 05 Error: UNC 8 sectors at LBA = 0x05d054f0 = 97539312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f0 54 d0 40 00 00:01:06.788 READ DMA EXT
25 00 08 f0 54 d0 40 00 00:01:03.255 READ DMA EXT
2f 00 01 10 00 00 00 00 00:01:03.254 READ LOG EXT
60 08 80 f0 54 d0 40 00 00:00:59.736 READ FPDMA QUEUED
61 e0 78 38 55 a3 40 00 00:00:59.689 WRITE FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 1685 hours (70 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f0 54 d0 05 Error: UNC 8 sectors at LBA = 0x05d054f0 = 97539312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f0 54 d0 40 00 00:01:03.255 READ DMA EXT
2f 00 01 10 00 00 00 00 00:01:03.254 READ LOG EXT
60 08 80 f0 54 d0 40 00 00:00:59.736 READ FPDMA QUEUED
61 e0 78 38 55 a3 40 00 00:00:59.689 WRITE FPDMA QUEUED
61 00 70 38 54 a3 40 00 00:00:59.688 WRITE FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 1685 hours (70 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f0 54 d0 05 Error: UNC at LBA = 0x05d054f0 = 97539312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 80 f0 54 d0 40 00 00:00:59.736 READ FPDMA QUEUED
61 e0 78 38 55 a3 40 00 00:00:59.689 WRITE FPDMA QUEUED
61 00 70 38 54 a3 40 00 00:00:59.688 WRITE FPDMA QUEUED
60 08 68 f8 1c 92 40 00 00:00:59.544 READ FPDMA QUEUED
60 08 60 e0 54 d0 40 00 00:00:59.543 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Examining /dev/disk2
smartctl 6.4 2015-06-04 r4109 [x86_64-apple-darwin10.8.0] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke,
www.smartmontools.org
Smartctl open device: /dev/disk2 failed:
Examining /dev/disk4
smartctl 6.4 2015-06-04 r4109 [x86_64-apple-darwin10.8.0] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke,
www.smartmontools.org
Smartctl open device: /dev/disk4 failed: