- Registriert
- 30.10.12
- Beiträge
- 307
Moin Moin liebe Apfler!
Eben kam ne Freundin mit ihrem 13"MacBook Pro 13"von 2012 zu mir. Ich sollte ihr eigentlich nur schnell mehr Ram einsetzen, SSD einbauen und High Sierra neu installieren... pustekuchen...
Das Teil war von Anfang an schon so abartig lahm, da kam mir direkt das Sata Kabel in Sinn. Smart Report gemacht, aber meines Erachtens lässt der Report nur vermuten, dass die Festplatte hin ist, aber nicht das Kabel.
Hier mal der Smart Report mit ihrer HDD in ihrem MAcBook:
Deshalb hab ich dann einfach mal die SSD eingebaut, Usb stick ran und davon gebootet... wollte dann die SSD in Apfs formatieren... auch da... pustekuchen... der hat angefangen und für ne halbe Stunde Medium auswerfen angezeigt, aber es gab null Fortschritt.
Daraufhin hab mich mal meine SSD aus meinem 2011er MacBook ausgebaut und bei Ihr eingebaut und ebenfalls nen Smart Report gemacht, der ist jetzt allerdings etwas anders als für ne HDD, vielleicht kann da mal wer drüberschauen und seine Meinung abgeben. Jedenfalls lief meine SSD in ihrem MacBook nicht gut. zwischenzeitlich hakte es mal oder war träge, nicht dauerhaft träge, sondern sporadisch. Die SSD in meinem MacBook von 2011 eingebaut ist jedenfalls dagegen ein Düsenjet...
Hier der Smart Report mit meiner SSD in ihrem MacBook:
Grade nochmal nen Smart report in meinem Macbook mit meiner SSD gemacht und das sieht genauso aus auf den ersten Blick wie mit meiner ssd in ihrem MacBook... hmmm. einfach mal auf blauen Dunst ein Kabel bestellen? Oder was meint ihr kann die Quelle des Fehlers sein?
Vielen Dank für Eure Hilfe!
Eben kam ne Freundin mit ihrem 13"MacBook Pro 13"von 2012 zu mir. Ich sollte ihr eigentlich nur schnell mehr Ram einsetzen, SSD einbauen und High Sierra neu installieren... pustekuchen...
Das Teil war von Anfang an schon so abartig lahm, da kam mir direkt das Sata Kabel in Sinn. Smart Report gemacht, aber meines Erachtens lässt der Report nur vermuten, dass die Festplatte hin ist, aber nicht das Kabel.
Hier mal der Smart Report mit ihrer HDD in ihrem MAcBook:
Code:
/Users/Elli/Downloads/SMARTReporter-DEMO.app/Contents/Resources/smartctl --tolerance=permissive --drivedb=/Users/Elli/Downloads/SMARTReporter-DEMO.app/Contents/Resources/drivedb.h --smart=on -a disk0
smartctl 6.6 2017-11-05 r4594 [Darwin 15.6.0 x86_64] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: APPLE HDD TOSHIBA MK5065GSXF
Serial Number: Z2AZCEGDT
LU WWN Device Id: 5 000039 4744021b9
Firmware Version: GV201B
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Jan 21 20:23:59 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 40) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 164) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 2094
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11304
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 5115
10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7641
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 677
192 Power-Off_Retract_Count 0x0032 093 093 000 Old_age Always - 3694
193 Load_Cycle_Count 0x0032 063 063 000 Old_age Always - 372202
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Min/Max 7/45)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 65
222 Loaded_Hours 0x0032 090 090 000 Old_age Always - 4152
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 312
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 1875
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 80% 5114 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Deshalb hab ich dann einfach mal die SSD eingebaut, Usb stick ran und davon gebootet... wollte dann die SSD in Apfs formatieren... auch da... pustekuchen... der hat angefangen und für ne halbe Stunde Medium auswerfen angezeigt, aber es gab null Fortschritt.
Daraufhin hab mich mal meine SSD aus meinem 2011er MacBook ausgebaut und bei Ihr eingebaut und ebenfalls nen Smart Report gemacht, der ist jetzt allerdings etwas anders als für ne HDD, vielleicht kann da mal wer drüberschauen und seine Meinung abgeben. Jedenfalls lief meine SSD in ihrem MacBook nicht gut. zwischenzeitlich hakte es mal oder war träge, nicht dauerhaft träge, sondern sporadisch. Die SSD in meinem MacBook von 2011 eingebaut ist jedenfalls dagegen ein Düsenjet...
Hier der Smart Report mit meiner SSD in ihrem MacBook:
Code:
/private/var/folders/17/3pvr5gnx0f7dzz6_nz0zhxz00000gn/T/AppTranslocation/174B1925-50BF-4053-AD17-7F6E3C86C29A/d/SMARTReporter-DEMO.app/Contents/Resources/smartctl --tolerance=permissive --drivedb=/private/var/folders/17/3pvr5gnx0f7dzz6_nz0zhxz00000gn/T/AppTranslocation/174B1925-50BF-4053-AD17-7F6E3C86C29A/d/SMARTReporter-DEMO.app/Contents/Resources/drivedb.h --smart=on -a disk1
smartctl 6.6 2017-11-05 r4594 [Darwin 17.3.0 x86_64] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 EVO 250GB
Serial Number: S1DBNSADC05763E
LU WWN Device Id: 5 002538 8a0118f30
Firmware Version: EXT0DB6Q
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 21 19:56:51 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4800) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 9912
12 Power_Cycle_Count 0x0032 086 086 000 Old_age Always - 13818
177 Wear_Leveling_Count 0x0013 091 091 000 Pre-fail Always - 103
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 065 050 000 Old_age Always - 35
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 13437
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 14691453329
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Grade nochmal nen Smart report in meinem Macbook mit meiner SSD gemacht und das sieht genauso aus auf den ersten Blick wie mit meiner ssd in ihrem MacBook... hmmm. einfach mal auf blauen Dunst ein Kabel bestellen? Oder was meint ihr kann die Quelle des Fehlers sein?
Vielen Dank für Eure Hilfe!
Zuletzt bearbeitet: