Tach,
ich verzweifle langsam mit dem Leopard Server 10.5.2. Der Server soll die Dienste DHCP, DNS, OpenDirectory und SMB zur Verfügung stellen.
1. Problem
Nun habe ich bei der Konfiguration von DHCP einen WINS-Server angegeben. Wenn ich nun einen XP/Vista Rechner starte erhalte alle Informationen auch wunderbar - nur eben nicht den WINS-Eintrag. Dieser ist bei mir jedoch immer leer.
Ausgabe serveradmin settings dhcp:
dhcp:logging_level = "HIGH"
dhcp:subnet_defaults:logVerbosity = "MEDIUM"
dhcp:subnet_defaults:WINS_node_type = "NOT_SET"
dhcp:subnet_defaults:selected_port_key_l ist:_array _index:0 = "fw0"
dhcp:subnet_defaults:selected_port_key_l ist:_array _index:1 = "en0"
dhcp:subnet_defaults:selected_port_key_l ist:_array _index:2 = "en1"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:0 = "HYBRID_H_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:1 = "PEER_P_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:2 = "BROADCAST_B_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:3 = "MIXED_M_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:4 = "NOT_SET"
dhcp:subnet_defaults:logVerbosityList:_a rray_index :0 = "LOW"
dhcp:subnet_defaults:logVerbosityList:_a rray_index :1 = "MEDIUM"
dhcp:subnet_defaults:logVerbosityList:_a rray_index :2 = "HIGH"
dhcp:subnet_defaults:routers = _empty_dictionary
dhcp:subnet_defaults:dhcp_domain_name = "ssch.lan"
dhcp:subnet_defaults:dhcp_domain_name_se rver:_arra y_index:0 = "192.168.2.2"
dhcp:subnet_defaults:dhcp_domain_name_se rver:_arra y_index:1 = "192.168.2.1"
dhcp:subnet_defaults:selected_port_key = "en0"
dhcp:static_maps = _empty_array
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_node_type = "BROADCAST_B_NODE"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_address = "192.168.2.0"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:descriptive_name = "192.168.2"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_secondary_server = ""
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_router = "192.168.2.1"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_scope_id = ""
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:selected_port_name = "en0"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_mask = "255.255.255.0"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:lease_max = 3600
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_domain_name = "ssch.lan"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:lease_time_secs = "2592000"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_range_end = "192.168.2.100"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_domain_name_server:_ar ray_index: 0 = "192.168.2.2"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_domain_name_server:_ar ray_index: 1 = "192.168.2.1"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_NBDD_server = ""
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_ldap_url:_array_index: 0 = "ldap://ssch-srv-001.ssch.lan/dc=ssch,dc=lan"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_enabled = yes
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_primary_server = "192.168.2.2"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_range_start = "192.168.2.30"
2. Problem
Samba habe ich als PDC konfiguriert. Mittlerweile kann ich auch einen XP Client in die Domäne aufnehmen, nachdem ich diradmin einen neuen Kurznamen [email protected] gegeben habe. Daraufhin wird automatisch ein Computerkonto - jedoch nicht als FQDN - angelegt. Nun wollte ich mich auf dem Client in der neuen Domäne einloggen und erhalte die Meldung: "Es kann keine Verbindung mit der Domäne hergestellt werden, da der Domänencontroller nicht verfügbar ist bzw. das Computerkonto nicht gefunden wurde."
Ausgabe log.smbd:
[2008/04/04 14:53:14, 2, pid=282] /SourceCache/samba/samba-187.1/samba/source/smbd/reply.c:reply_special(328)
netbios connect: name1=SSCH-SRV-001 name2=LTH09
[2008/04/04 14:53:14, 2, pid=282] /SourceCache/samba/samba-187.1/samba/source/smbd/reply.c:reply_special(335)
netbios connect: local=ssch-srv-001 remote=lth09, name type = 0
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/smbd/sesssetup.c:setup_new_vc_session(1260)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/lib/module.c:do_smb_load_module(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/smbd/sesssetup.c:setup_new_vc_session(1260)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/auth/auth.c:check_ntlm_password(319)
check_ntlm_password: Authentication for user [] -> [] FAILED with error NT_STATUS_NO_SUCH_USER
Ausgabe serveradmin settings smb:
smb:realm = "SSCH.LAN"
smb:logon drive = "H:"
smb:logon path = "\\%N\profiles\%u"
smb:workgroup = "ssch.lan"
smb:wins support = yes
smb:map to guest = "Never"
smb:enable print services = "yes"
smb:wins server = _empty_array
smb:security = "USER"
smb:server string = "ssch-srv-001"
smb:ntlm auth = "yes"
smb:netbios name = "ssch-srv-001"
smb:max smbd processes = 100
smbs level = 65
smbreferred master = yes
smb:add user script = "/usr/bin/opendirectorypdbconfig -c create_user_account -r %u -n /LDAPv3/127.0.0.1"
smb:lanman auth = "no"
smb:domain logons = yes
smb:domain master = yes
smb:use spnego = yes
smb:use kerberos keytab = yes
smb:adminCommands:homes = yes
smb:adminCommands:serverRole = "primarydomaincontroller"
smb:adminCommands:ldapRole = "1.1 - hosting a master LDAP directory server\n"
smb:auth methods = "odsam"
smb:dos charset = "437"
smb:enable disk services = "yes"
smb:log level = 2
smb:add machine script = "/usr/bin/opendirectorypdbconfig -c create_computer_account -r %u -n /LDAPv3/127.0.0.1"
Ausgabe smb.conf (selbst editiert, da ich Server-Admin nicht mehr vertraue):
[global]
debug pid = yes
log level = 1
server string = Mac OS X
printcap name = cups
printing = cups
encrypt passwords = yes
use spnego = yes
passdb backend = odsam
idmap domains = default
idmap config default: default = yes
idmap config default: backend = odsam
idmap alloc backend = odsam
idmap negative cache time = 5
map to guest = Bad User
guest account = nobody
unix charset = UTF-8-MAC
display charset = UTF-8-MAC
dos charset = ISO8859-15
;dos charset = 437
vfs objects = darwinacl,darwin_streams
; Don't become a master browser unless absolutely necessary.
os level = 2
domain master = yes
preferred master = yes
local master = yes
domain logons = yes
wins support = yes
wins server = 192.168.2.2
wins proxy = yes
dns proxy = yes
preferred master = yes
netbiosname = ssch-srv-001
workgroup = ssch.local
interfaces 192.168.2.2/255.255.255.0
time server = yes
; For performance reasons, set the transmit buffer size
; to the maximum and enable sendfile support.
max xmit = 131072
use sendfile = yes
; The darwin_streams module gives us named streams support.
stream support = yes
ea support = yes
; Enable locking coherency with AFP.
darwin_streams:brlm = yes
; Core files are invariably disabled system-wide, but attempting to
; dump core will trigger a crash report, so we still want to try.
enable core files = yes
; Configure usershares for use by the synchronize-shares tool.
usershare max shares = 1000
usershare path = /var/samba/shares
usershare owner only = no
usershare allow guests = yes
usershare allow full config = yes
; Filter inaccessible shares from the browse list.
com.apple:filter shares by access = yes
; Check in with PAM to enforce SACL access policy.
obey pam restrictions = yes
; Make sure that we resolve unqualified names as NetBIOS before DNS.
name resolve order = lmhosts wins bcast host
; Pull in system-wide preference settings. These are managed by
; synchronize-preferences tool.
include = /var/db/smb.conf
Kann mir BITTE jemand helfen? Nach 4 Tagen Konfiguration bin ich fast am Ende!
(Wäre ich nur bei meinem Linux Server geblieben. Dort hat das alles funktioniert!)
Bye
ich verzweifle langsam mit dem Leopard Server 10.5.2. Der Server soll die Dienste DHCP, DNS, OpenDirectory und SMB zur Verfügung stellen.
1. Problem
Nun habe ich bei der Konfiguration von DHCP einen WINS-Server angegeben. Wenn ich nun einen XP/Vista Rechner starte erhalte alle Informationen auch wunderbar - nur eben nicht den WINS-Eintrag. Dieser ist bei mir jedoch immer leer.
Ausgabe serveradmin settings dhcp:
dhcp:logging_level = "HIGH"
dhcp:subnet_defaults:logVerbosity = "MEDIUM"
dhcp:subnet_defaults:WINS_node_type = "NOT_SET"
dhcp:subnet_defaults:selected_port_key_l ist:_array _index:0 = "fw0"
dhcp:subnet_defaults:selected_port_key_l ist:_array _index:1 = "en0"
dhcp:subnet_defaults:selected_port_key_l ist:_array _index:2 = "en1"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:0 = "HYBRID_H_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:1 = "PEER_P_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:2 = "BROADCAST_B_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:3 = "MIXED_M_NODE"
dhcp:subnet_defaults:WINS_node_type_list :_array_in dex:4 = "NOT_SET"
dhcp:subnet_defaults:logVerbosityList:_a rray_index :0 = "LOW"
dhcp:subnet_defaults:logVerbosityList:_a rray_index :1 = "MEDIUM"
dhcp:subnet_defaults:logVerbosityList:_a rray_index :2 = "HIGH"
dhcp:subnet_defaults:routers = _empty_dictionary
dhcp:subnet_defaults:dhcp_domain_name = "ssch.lan"
dhcp:subnet_defaults:dhcp_domain_name_se rver:_arra y_index:0 = "192.168.2.2"
dhcp:subnet_defaults:dhcp_domain_name_se rver:_arra y_index:1 = "192.168.2.1"
dhcp:subnet_defaults:selected_port_key = "en0"
dhcp:static_maps = _empty_array
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_node_type = "BROADCAST_B_NODE"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_address = "192.168.2.0"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:descriptive_name = "192.168.2"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_secondary_server = ""
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_router = "192.168.2.1"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_scope_id = ""
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:selected_port_name = "en0"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_mask = "255.255.255.0"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:lease_max = 3600
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_domain_name = "ssch.lan"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:lease_time_secs = "2592000"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_range_end = "192.168.2.100"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_domain_name_server:_ar ray_index: 0 = "192.168.2.2"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_domain_name_server:_ar ray_index: 1 = "192.168.2.1"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_NBDD_server = ""
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_ldap_url:_array_index: 0 = "ldap://ssch-srv-001.ssch.lan/dc=ssch,dc=lan"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:dhcp_enabled = yes
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:WINS_primary_server = "192.168.2.2"
dhcp:subnets:_array_id:E39AE2FF-4858-48EE-B070-CED61E2A89DF:net_range_start = "192.168.2.30"
2. Problem
Samba habe ich als PDC konfiguriert. Mittlerweile kann ich auch einen XP Client in die Domäne aufnehmen, nachdem ich diradmin einen neuen Kurznamen [email protected] gegeben habe. Daraufhin wird automatisch ein Computerkonto - jedoch nicht als FQDN - angelegt. Nun wollte ich mich auf dem Client in der neuen Domäne einloggen und erhalte die Meldung: "Es kann keine Verbindung mit der Domäne hergestellt werden, da der Domänencontroller nicht verfügbar ist bzw. das Computerkonto nicht gefunden wurde."
Ausgabe log.smbd:
[2008/04/04 14:53:14, 2, pid=282] /SourceCache/samba/samba-187.1/samba/source/smbd/reply.c:reply_special(328)
netbios connect: name1=SSCH-SRV-001 name2=LTH09
[2008/04/04 14:53:14, 2, pid=282] /SourceCache/samba/samba-187.1/samba/source/smbd/reply.c:reply_special(335)
netbios connect: local=ssch-srv-001 remote=lth09, name type = 0
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/smbd/sesssetup.c:setup_new_vc_session(1260)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/lib/module.c:do_smb_load_module(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/smbd/sesssetup.c:setup_new_vc_session(1260)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/04/04 14:53:14, 2, pid=281] /SourceCache/samba/samba-187.1/samba/source/auth/auth.c:check_ntlm_password(319)
check_ntlm_password: Authentication for user [] -> [] FAILED with error NT_STATUS_NO_SUCH_USER
Ausgabe serveradmin settings smb:
smb:realm = "SSCH.LAN"
smb:logon drive = "H:"
smb:logon path = "\\%N\profiles\%u"
smb:workgroup = "ssch.lan"
smb:wins support = yes
smb:map to guest = "Never"
smb:enable print services = "yes"
smb:wins server = _empty_array
smb:security = "USER"
smb:server string = "ssch-srv-001"
smb:ntlm auth = "yes"
smb:netbios name = "ssch-srv-001"
smb:max smbd processes = 100
smbs level = 65
smbreferred master = yes
smb:add user script = "/usr/bin/opendirectorypdbconfig -c create_user_account -r %u -n /LDAPv3/127.0.0.1"
smb:lanman auth = "no"
smb:domain logons = yes
smb:domain master = yes
smb:use spnego = yes
smb:use kerberos keytab = yes
smb:adminCommands:homes = yes
smb:adminCommands:serverRole = "primarydomaincontroller"
smb:adminCommands:ldapRole = "1.1 - hosting a master LDAP directory server\n"
smb:auth methods = "odsam"
smb:dos charset = "437"
smb:enable disk services = "yes"
smb:log level = 2
smb:add machine script = "/usr/bin/opendirectorypdbconfig -c create_computer_account -r %u -n /LDAPv3/127.0.0.1"
Ausgabe smb.conf (selbst editiert, da ich Server-Admin nicht mehr vertraue):
[global]
debug pid = yes
log level = 1
server string = Mac OS X
printcap name = cups
printing = cups
encrypt passwords = yes
use spnego = yes
passdb backend = odsam
idmap domains = default
idmap config default: default = yes
idmap config default: backend = odsam
idmap alloc backend = odsam
idmap negative cache time = 5
map to guest = Bad User
guest account = nobody
unix charset = UTF-8-MAC
display charset = UTF-8-MAC
dos charset = ISO8859-15
;dos charset = 437
vfs objects = darwinacl,darwin_streams
; Don't become a master browser unless absolutely necessary.
os level = 2
domain master = yes
preferred master = yes
local master = yes
domain logons = yes
wins support = yes
wins server = 192.168.2.2
wins proxy = yes
dns proxy = yes
preferred master = yes
netbiosname = ssch-srv-001
workgroup = ssch.local
interfaces 192.168.2.2/255.255.255.0
time server = yes
; For performance reasons, set the transmit buffer size
; to the maximum and enable sendfile support.
max xmit = 131072
use sendfile = yes
; The darwin_streams module gives us named streams support.
stream support = yes
ea support = yes
; Enable locking coherency with AFP.
darwin_streams:brlm = yes
; Core files are invariably disabled system-wide, but attempting to
; dump core will trigger a crash report, so we still want to try.
enable core files = yes
; Configure usershares for use by the synchronize-shares tool.
usershare max shares = 1000
usershare path = /var/samba/shares
usershare owner only = no
usershare allow guests = yes
usershare allow full config = yes
; Filter inaccessible shares from the browse list.
com.apple:filter shares by access = yes
; Check in with PAM to enforce SACL access policy.
obey pam restrictions = yes
; Make sure that we resolve unqualified names as NetBIOS before DNS.
name resolve order = lmhosts wins bcast host
; Pull in system-wide preference settings. These are managed by
; synchronize-preferences tool.
include = /var/db/smb.conf
Kann mir BITTE jemand helfen? Nach 4 Tagen Konfiguration bin ich fast am Ende!
(Wäre ich nur bei meinem Linux Server geblieben. Dort hat das alles funktioniert!)Bye