Habe von unlock 1.1.1 auf 1.1.2 upgedated und jetzt geht nix mehr

MarcelSzel@HH

Tokyo Rose
Registriert
13.08.06
Beiträge
67
Hallo,

ich habe gestern die kurzanleitung durchgespielt und jetzt komme ich nicht wieder runter von 1.1.2 auf 1.1.1, ich komme nicht in die Telefonfunktion unter 1.1.1 rein.

Er sagt andauernd incorrect sim.

Habe auf Hackintosh das gefunden.

Originally Posted by cheetah2k
For the life of me (experienced iphone breaker) I cannot get the 1.1.1 restore to work with a brand new 1.1.2 phone. So... Back to 1.0.2 for the time being peoples...

What i have done to get this baby working (in Windows XP on itunes 7.4.3):

Preparations: - Take out your SIM card!!

1. Boot the phone with 1.1.2 firmware. Hold down the home and on/off button for 10 sec, screen goes black, release on/off button, wait 10 sec, release home and get into DFU mode.
2. Within itunes, hold shift key Restore to 1.0.2 (you will get the 1013 error) (note: all versions of the *.ipsw restore files can be downloaded from www.iunlock.no)
3. Once the "connect to itunes comes up" on the iphone screen, run Apptapp ver 3.0 on your PC one time, and it will abort with errors
4. Run Apptapp again for the 2nd time straight after this error, and it will run thru perfectly and jailbreak the phone
5. Under installer, install BSD, SSH, Terminal VT100
6. Copy the lockdown and youtube files across using ibrickr 0.91
7. Using filezilla client 3.x.x.x or other iphone drive access (i dont recommend ibrickr for this) grab the new version of AnySIM 1.2, unzip it to your hard drive on your PC, and then copy it across into a new directory (anySIM.app) under the Applications directory on the iphone

****Insert your SIM HERE!*****

8. Using Terminal on your iphone, type in "chmod -Rf +x /Applications/" (without the inverted commas) and hit return
9. While you're still in Terminal, type in "/Applications/anySIM.app/anySIM" and hit return
10. Follow the steps to unlock your phone
11. Done. Now the 14.02_13G baseband is hacked. At least once a "boot to activation" in 1.1.1 on windows is released, this will have to do for now. The good news is that the baseband will remain unlocked for all future 1.02, 1.1.1 and 1.1.2 restores after the above. We only need a "DFU kick to Activate" in 1.1.1, and a jailbreak in 1.1.2!

And i cannot complain with 1.0.2 for the time being. At least the phone works perfectly!

Cheers,

Wardski



Kann mir jemand helfen was ich in Punkt 6 machen soll???

Punkt 7 und 8 verstehe ich auch nicht!!!

Wäre für eure Hilfe sehr dankbar
 

.david

Filippas Apfel
Registriert
18.10.07
Beiträge
8.926
5. Under installer, install BSD, SSH, Terminal VT100
6. Copy the lockdown and youtube files across using ibrickr 0.91
7. Using filezilla client 3.x.x.x or other iphone drive access (i dont recommend ibrickr for this) grab the new version of AnySIM 1.2, unzip it to your hard drive on your PC, and then copy it across into a new directory (anySIM.app) under the Applications directory on the iphone
****Insert your SIM HERE!*****
8. Using Terminal on your iphone, type in "chmod -Rf +x /Applications/" (without the inverted commas) and hit return
9. While you're still in Terminal, type in "/Applications/anySIM.app/anySIM" and hit return

Kann mir jemand helfen was ich in Punkt 6 machen soll???
Punkt 7 und 8 verstehe ich auch nicht!!!

OK, in aller Kürze:

Punkt 6: Programm iBrickr Version 0.91 auf dem PC starten, enthält die Option: "FIles kopieren" (oder so ähnlich genannt) und vom PC nach iPhone in die richtigen Verzeichnisse kopieren. Irgendwo müsste eigentlich auch stehen, wo die hingehören, wenn nicht: mit WinSCP (wenn Du WinSCP nicht kennst: aus dem Netz runterladen, aufm PC installieren, auf's iPhone connecten) auf dem iPhone nachsehen oder Google!:)

Punkt 7: Nimm WinSCP; connect auf's iPhone und die entpackten Dateien - vom aus dem Netz runtergeladenen anySIM 1.2 - in ein neu anzulegendes Verzeichnis innerhalb des iPhone Ordners "Applications" mit dem Namen anySIM.app auf dem iPhone kopieren.

Punkt 8: Du hast unter Punkt 5 auf dem iPhone bereits die Anwendung "Terminal" installiert! Diese öffnen und obenstehenden Text eintippen (sicherstellen, dass Du das genau so eingibst, natürlich ohne Anführungszeichen!).

Punkt 9: dito

David
 
Zuletzt bearbeitet:

The game

Gala
Registriert
25.12.05
Beiträge
48
1.1.2 Unlock fehlgeschlagen

Ich habe ein großes Problem...
Hatte die 1.1.1 perfekt am laufen und habe dann versucht, auf 1.1.2 zu updaten.
habe oktoprep installiert, dann 1.1.2 update gemacht und anschließend den jailbreak mit jailbreak.jar... hatte dann auch ein jailbreaked 1.1.2er iphone. anschließend habe ich anysim1.2 per ssh draufgezogen und ausgeführt. der balken stockte dann nach ein paar minuten bei 30 prozent und das iphone startete neu.
seitdem kam ich nicht mehr über den start screen hinaus, da sich das iphone immer wieder an dieser stelle aufhing.
habe dann versucht, per restore mit itunes wieder auf 1.1.1 zu kommen und erhalte nach dem restore den fehler (1015) und habe nun dieses kabel mit itunes symbol auf dem display. kann somit auch keinen tiff exploit oder jailbreak mehr machen.

Wie kann ich die 1.1.1 wieder ans Laufen bekommen? kann ich irgendwie aus diesem restore mode rauskommen und jailbreaken? Hat jemand eine idee?
 

pulleman

Gast
der fehler 1015 ist normal, du nimmst jetzt independence (wenn itunes 7.5, bitte patchen) um es aus dem modus raus zu kicken
 

Cathul

Tydemans Early Worcester
Registriert
26.10.07
Beiträge
397
Ich habe ein großes Problem...
Hatte die 1.1.1 perfekt am laufen und habe dann versucht, auf 1.1.2 zu updaten.
habe oktoprep installiert, dann 1.1.2 update gemacht und anschließend den jailbreak mit jailbreak.jar... hatte dann auch ein jailbreaked 1.1.2er iphone. anschließend habe ich anysim1.2 per ssh draufgezogen und ausgeführt. der balken stockte dann nach ein paar minuten bei 30 prozent und das iphone startete neu.

Da schon seit Wochen bekannt ist, dass anySIM-1.1.2 nicht direkt unter Firmware 1.1.2 funktioniert, gibt es hier wohl keine Gnade.
Alle wirklich funktionierenden How-Tos für das Upgrade von 1.1.1 auf 1.1.2 sagen, dass man anySIM-1.1.2u unter Firmware 1.0.2 ausführen soll.

seitdem kam ich nicht mehr über den start screen hinaus, da sich das iphone immer wieder an dieser stelle aufhing.
habe dann versucht, per restore mit itunes wieder auf 1.1.1 zu kommen und erhalte nach dem restore den fehler (1015) und habe nun dieses kabel mit itunes symbol auf dem display. kann somit auch keinen tiff exploit oder jailbreak mehr machen.

Wie kann ich die 1.1.1 wieder ans Laufen bekommen? kann ich irgendwie aus diesem restore mode rauskommen und jailbreaken? Hat jemand eine idee?

Wie wäre es mit einem Restore auf 1.1.2, dann ein Downgrade auf 1.1.1 und danach ein Downgrade auf 1.0.2 mit anschliessendem SIM-Unlock?
Oder alternativ iBrickr, welches in jedem seriösen HowTo für den Fehler 1015 empfohlen wird?