Hilfe Mac TOT?

  • Ersteller sasapeng
  • Erstellt am

sasapeng

Gast
Folgender Rechner: G5 Dual 1.8

Folgendes Problem: Rechner startete plötzlich nicht mehr, nachdem er hing und über die Powertaste ausgeschaltet wurde.

System drauf = MacOSX Server, funzt aber auch nicht mit ner anderen Platte mit OSX drauf.

Schalte ich den Rechner ein, blinkt die power LED in gleichmäßigem Abstand langsam und nach ca 5 min fängt der Lüfter an wie wild zu blasen und das bleibt dann so.

Von CD starten geht nicht, da das Laufwerk nicht aufgeht.

PRam zurücksetzten bzw. NVram zurücksetzten: die Tastenkürzel funzen nicht, kein Bild, kein Startton, nichts dergleichen.

Nun kann ich mich erinnern das man irgendwo am Board auch irgendwas reseten kann, weiss aber nich mehr wie und was das war. Hat da wer ne Ahnung?

Woran könnte es noch liegen, speicher wurde getauscht, Festplatten auch.

(komischerweise stand die ganze Nacht n PC neben dem G5, aber so zickig kann er doch eigentlich nicht sein :) )

also ich wäre dankbar für jede hilfe.
 

hochstammapfel

Châtaigne du Léman
Registriert
18.04.05
Beiträge
826
Hm. Hast du irgendwelche (USB-)Geräte, die du abhängen kannst?
Auf dem Board (keine Ahnung, hatte noch nie nen G5 :() könnte sich _möglicherweise_ ein kleiner Schalter befinden. So ein quadratischer Metallbobbel mit Kantenlänge ca. 2mm, mit einem weiteren, runden, schwarzen Gummibobbel drauf. Da kann man draufdrücken und dann wird (glaube ich) ebenfalls der PRAM resettet.

Solches Verhalten, dass nichts mehr geht, kann durch einen Kurzschluss irgendwo aufm Board verursacht werden, evt. austauschen... :(
sasapeng schrieb:
(komischerweise stand die ganze Nacht n PC neben dem G5, aber so zickig kann er doch eigentlich nicht sein :) )
Du glaubst nicht, wie viel Freude mein kleines hatte, als die alte Dose am Boden zur Firewall degradiert wurde... :p
 

G5_Dual

Melrose
Registriert
31.05.04
Beiträge
2.476
Learn how to reset the SMU on Power Mac G5 (Late 2004) and Power Mac G5 (Late 2005) computers, and when to do so.
The SMU (System Management Unit) is a microcontroller chip on the logic board that controls all power functions for your computer. If your computer is experiencing any issues regarding these functions, resetting the SMU may resolve the issue. The functions controlled by the SMU include:
• It tells the computer when to turn on, turn off, sleep, wake, idle, and so on.
• It handles system resets from various commands.
• It controls the fan.
Note that resetting the SMU does not reset the PRAM.
Resetting the SMU will not resolve issues in which your computer is unresponsive--in these situations, restarting your computer will generally suffice. If your computer isn't responding, perform these steps one at a time, in this order, until the issue has been resolved:
1. Force Quit (Option-Command-Escape)
2. Restart (Control-Command-Power)
3. Force Shut Down (press the power button for 10 seconds)
Resetting the SMU can resolve some computer issues such as not starting up, not displaying video, sleep issues, fan noise issues, and so on. If your computer still exhibits these types of issues even after you've restarted the computer, try resetting the SMU.
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
1. Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
2. Remove the power cord from the computer.
3. Wait 15 seconds.
4. Plug in the power cord.
5. Turn on the computer.
Power Mac G5 (Late 2005)
To reset the SMU on a Power Mac G5 (Late 2005) computer, either use the steps listed above for the Power Mac G5 (Late 2004) or:
1. Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
2. Open and remove both the metallic outer door and the inner plastic air deflector.
3. Remove the fan assembly immediately to the left of the processor module.
4. Press the SMU reset button on the logic board.
5. Replace the fan assembly, air deflector, and outer door.
6. Turn on the computer.
Unlike earlier models of Power Mac G5 or Power Mac G4 computers, the Power Mac G5 (Late 2004) and (Late 2005) models do not have a PMU. This functionality has been replaced by the SMU.

Search
Advanced Search | Help


Email This Article
Log in to send email
Did this article help you?
It solved my issue...
Tell us what works for you.

It's good, but...
Report typos, inaccuracies, etc.

It wasn't helpful...
Tell us what would have helped.
Languages
This article is available in the following languages:
• English
• ???
 

G5_Dual

Melrose
Registriert
31.05.04
Beiträge
2.476
kurz zusammen gefasst.
Du drückst auf den Ausschaltknopf und bleibst darauf, dann klaust du ihm für 10 Sekunden das Stromkabel und steckst es dann wieder ein.
Dabei immer auf dem Knopf bleiben.
Danach normal neu Starten.
Bei der anderen Ausführung gibt es einen Resettschalter hinter dem Prozessorlüfter.